AveoNetwork.com Archive -- on AveoForum.com

You didn't need to remove the stock rubber. Even with it, you will use a lot of window weld. Also, I wish that bolt broke rather than the transmission housing itself. Between the filled mounts and my new brace which supports the lower part of the trans, the shifter does not move at all. I can hear a...

I have 15" Rotas with 205/50/15.



Chad
http://www.uniquemotorsports.com

http://www.uniquemotorsports.com/wp-content/uploads/2010/01/l_1600_1200_9A3FAFDC-DFB6-4435-8784-2147A593E045.jpeg I went with a 205/50/15 which required a little clearancing of the front inner fenders. Here is a link to all my Aveo tagged posts. http://www.uniquemotorsports.com/tag/aveo/ Chad http:...

I finally have all my gears back. If this fails, then I will probably have to replace the transmission bell housing. Hopefully this holds, I'm mostly sure it will. I also ordered a replacement bolt for my remaining good bolt hole about 3 weeks ago and still don't have it. I gave up last night and th...

Those are some good fill images. I recently filled mine as well.

http://www.uniquemotorsports.com/2010/0 ... ng-take-2/

I see what you are saying now. The transmission housing where the bolt goes actually broke. I now have it as good as I can. The middle bolt is still missing as where it bolts to is broke. The lower bolt has a Subaru stud which was meant to be temporary, but I can't get it out since the extension I w...

The two holes in the bracket show where the two bolts go. I'm pretty sure they are a 12M by 1.25... I also have some wheel studs for a Subaru which are also a 1.25. I'll be welding on an extension and using these to test the bolt size and as a temporary fix until some new bolts come in. 300? wow... ...

I lost a bolt... If you look at #6 of the following link, I'm actually missing 2 of the 3 that hold this to the engine. This makes the entire bracket swing and therefore the motor is allowed to flex. http://www.gmpartsdistributor.com/partlocator/index.cfm?action=getJointLocator&siteid=213761&...

http://www.uniquemotorsports.com/2010/0 ... mber-2010/

Set to the sounds of a local dj Dert Cheep if you play the slide show.

Chad
www.uniquemotorsports.com

have pictures of the mount failures? for reference Not yet... but I have some pictures of the mount I filled on Picasa already. Haven't filled in the description or moved it to my site yet though. http://picasaweb.google.com/subachad When I fill then replace the broken mount, I'll make a new blog p...