Fog Lamp / Strobe Modification

[WOLFMAN AK907]

No no, I wouldn't use those damn things anyways. I really just liked the shap of the rubber backing on the bulbs and I love the controller. It would look perfect mounted under my dash.

[thehunterooo]

nice DIY, when i put in my fog lights, i might have to add some strobes

[HitecRednec]

OK following Wolfman I also wanted to use HID technology in my Fog Lamp so Using the same Kit he purchased from VVME.com I Modified my fog Lamps to Accomidate them it's very easy and used only a dremel tool with a cut off disc and a barrel sander and a 1/4 drill bit.

I used a drill bit to drill 3 hiles on the 4 sides of the molded plug.

then I used the Dremel cut-off disc to carefull cout out the molded plug.

Then I used the barrel sander to enlarge the hole to accomidate the the plug in the kit.

I removed the Black and Blue wire by carefully pulling it thru the grommet and plugged the holes with silicone from the inside and out.

[Manorness7]

I would love to see a video of these, also.

[HitecRednec]

I'll post a Video as soon as it gets dusk here in FLorida as I just finished the install a few moments ago.

The HitecRednec

[HitecRednec]

Video Here:

http://www.youtube.com/watch?v=kw-G0XLmpcw

The HitecRednec

Sorry for the quality will learn how to do better in the future

[WOLFMAN AK907]

Looks awesome. I'm definently doing mine now before I install them.

[Reddemonx92]

wow very nice hitec