Page 2 of 2
Re: Fog Lamp / Strobe Modification
Posted: Fri Oct 23, 2009 10:19 pm
by WOLFMAN AK907
No no, I wouldn't use those damn things anyways. I really just liked the shap of the rubber backing on the bulbs and I love the controller. It would look perfect mounted under my dash.
Re: Fog Lamp / Strobe Modification
Posted: Sat Oct 24, 2009 2:41 am
by thehunterooo
nice DIY, when i put in my fog lights, i might have to add some strobes
Re: Fog Lamp / Strobe Modification
Posted: Fri Oct 30, 2009 7:57 pm
by HitecRednec
OK following Wolfman I also wanted to use HID technology in my Fog Lamp so Using the same Kit he purchased from VVME.com I Modified my fog Lamps to Accomidate them it's very easy and used only a dremel tool with a cut off disc and a barrel sander and a 1/4 drill bit.
I used a drill bit to drill 3 hiles on the 4 sides of the molded plug.
then I used the Dremel cut-off disc to carefull cout out the molded plug.
Then I used the barrel sander to enlarge the hole to accomidate the the plug in the kit.
I removed the Black and Blue wire by carefully pulling it thru the grommet and plugged the holes with silicone from the inside and out.
Re: Fog Lamp / Strobe Modification
Posted: Sat Oct 31, 2009 11:05 am
by Manorness7
I would love to see a video of these, also.
Re: Fog Lamp / Strobe Modification
Posted: Sat Oct 31, 2009 4:29 pm
by HitecRednec
I'll post a Video as soon as it gets dusk here in FLorida as I just finished the install a few moments ago.
The HitecRednec
Re: Fog Lamp / Strobe Modification
Posted: Sat Oct 31, 2009 8:07 pm
by HitecRednec
Video Here:
http://www.youtube.com/watch?v=kw-G0XLmpcwThe HitecRednec
Sorry for the quality will learn how to do better in the future
Re: Fog Lamp / Strobe Modification
Posted: Sat Oct 31, 2009 8:20 pm
by WOLFMAN AK907
Looks awesome. I'm definently doing mine now before I install them.
Re: Fog Lamp / Strobe Modification
Posted: Sun Nov 01, 2009 8:45 am
by Reddemonx92
wow very nice hitec