UR front lower bar and others

Post you HOW-TO and DIY threads here.
User avatar
one_man_jam
Posts: 169
Joined: Mon Sep 14, 2009 11:08 am
Location: Flagstaff, AZ

UR front lower bar and others

Postby one_man_jam » Tue Dec 29, 2009 1:16 am

hey all =)
i finally had time to get everything put in. SO now i have all pieces from ULTRAracing in =)

this write up is for the front lower bar.

tools needed include jack stands, jack, 17mm socket and 19mm socket (i also used a 19mm wrench), lug wrench to take wheels off.

honestly i think the install would only be 15 minutes tops with a lift and an impact wrench, but it took me and my friend roughly an hour to do this though.

Image

this is how it looks all bolted up.

The first thing i did was grab a friend haha. it does help to work both sides at the same time.

ok so start by taking off front wheels and having a set of jack stands
you want to get your front end up in this sort of position

[Image

i did this by first getting one side up, putting the jack stand in its place and doing the same process for the next side.

i then put the big jack right here for safety precautions and if the frame were to move any while the bolts were being taken out

Image

i then decided to take out this bolt first on each side, get the frame brace in place for those two bolts then kind of leave the bar ontop of the smaller jack, we did this so that we could move onto the next bolts without having to hold onto the brace(you can see it there in the middle)

Image
these first bolts we tackled on each side it was a 17mm bolt and with wheels off it gives better room to move around as you can see

the two bolts behind these ones are big momma 19mm bolts

as soon as the big ones are out (this is where i used the 19mm wrench) you can move the smaller jack and position the brace in place and tighten down everything

so basically i pulled the 17mm bolts out, put the brace up, hand tightened those back in place
then i took the 19mm bolts out and put the brace up and hand tightened those in place
and lastly tightened everything down

and your done :D

everything went smoothly though and this is a nice straightforward install. any additional questions feel free to ask.




also you can see the rear sway bar in one of the pics and for that i used the trick where you lower the rear frame and the springs fall out method. again having a friend to help was nice where you can do both sides at the same time. other than this, Larsbud writeup for this helped me along nicely




and also the front strut bar went in rather nicely as well. one thing about that though was that i didnt cut the one bracket larsbud mentioned. instead i used the provide washer for the bar to sit on and it actually fit perfectly and flush with the bracket. i just used some extra washers laying around to compensate for using the providied one.




so far with all the bars in. it feels pretty dang nice :lol:
i noticed a big difference with my first turn just onto the main road. defintely a lot less body roll and handling feels brand new. i'll be hitting up an autocross event sometime soon to really put everything to the test :D

Last edited by one_man_jam on Wed Jan 20, 2010 9:51 pm, edited 1 time in total.
UR Canada goodies installed and available here http://ultraracingcanada.com/?q=catalog/27
ImageImage

User avatar
LarsBud
Posts: 147
Joined: Mon Sep 14, 2009 8:17 am
Location: Waterloo, Ontario, Canada
Contact:

Re: UR front lower bar and others

Postby LarsBud » Tue Dec 29, 2009 7:56 am

Nice work, I'm also very happy with the improved handling.
I know if I was going to hit the track, I’d add the rest of the package like you did.
Last edited by LarsBud on Wed Dec 30, 2009 9:05 am, edited 1 time in total.

User avatar
one_man_jam
Posts: 169
Joined: Mon Sep 14, 2009 11:08 am
Location: Flagstaff, AZ

Re: UR front lower bar and others

Postby one_man_jam » Tue Dec 29, 2009 7:45 pm

LarsBud wrote:Nice work, I'm also very happy with the improved handling.
I know if I was going to hit, I’d add the rest of the package like you did.


ya definitely i think the front strut bar and the rear sway are great additions themselves. the rear strut and lower brace i think clean things up just a bit more.
UR Canada goodies installed and available here http://ultraracingcanada.com/?q=catalog/27
ImageImage

marmite369
Posts: 70
Joined: Sun Jan 17, 2010 5:38 pm
Location: uk oxford

Re: UR front lower bar and others

Postby marmite369 » Sat Jan 30, 2010 1:54 pm

hey has onyone found a 4 point upper front strut brace rather than the 2 point one that UR do cheers as i have read far to many bad reviews now on 2 point stut braces to be tempted into buying one of these thanks

User avatar
thehunterooo
Posts: 944
Joined: Sat Sep 12, 2009 11:33 pm
Location: Tampa, FL

Re: UR front lower bar and others

Postby thehunterooo » Sat Jan 30, 2010 3:34 pm

I wish they made a 4 point strut bar
http://www.facebook.com/#/profile.php?ref=name&id=100000185677338

http://www.cardomain.com/ride/3124271

User avatar
WOLFMAN AK907
Posts: 1008
Joined: Sat Sep 12, 2009 2:38 am
Location: Fairbanks, Alaska
Contact:

Re: UR front lower bar and others

Postby WOLFMAN AK907 » Sat Jan 30, 2010 4:22 pm

Here's the 4-point front strut-tower brace and some other goodies:
http://www.sgcarstyling.com/index.php?m ... 1e9140af4d
Farthest North Aveo: Fairbanks, Alaska
ImageImageImage

marmite369
Posts: 70
Joined: Sun Jan 17, 2010 5:38 pm
Location: uk oxford

Re: UR front lower bar and others

Postby marmite369 » Sun Jan 31, 2010 2:06 pm

1034 Incorrect key file for table 'zen_whos_online'; try to repair it

is all i get when i try to open that link mate

User avatar
thehunterooo
Posts: 944
Joined: Sat Sep 12, 2009 11:33 pm
Location: Tampa, FL

Re: UR front lower bar and others

Postby thehunterooo » Sun Jan 31, 2010 2:16 pm

i opened it and it still is a 2 point to me, I think he and myself want the one with the two bars that go towards the back off the sides, it looks a lot more stable
http://www.facebook.com/#/profile.php?ref=name&id=100000185677338

http://www.cardomain.com/ride/3124271

User avatar
WOLFMAN AK907
Posts: 1008
Joined: Sat Sep 12, 2009 2:38 am
Location: Fairbanks, Alaska
Contact:

Re: UR front lower bar and others

Postby WOLFMAN AK907 » Sun Jan 31, 2010 5:19 pm

Oh, I don't know then. The link works fine, but apparently I misunderstood and that's not what you're looking for.
Farthest North Aveo: Fairbanks, Alaska
ImageImageImage

User avatar
thehunterooo
Posts: 944
Joined: Sat Sep 12, 2009 11:33 pm
Location: Tampa, FL

Re: UR front lower bar and others

Postby thehunterooo » Sun Jan 31, 2010 7:32 pm

I see what you meant with the 4 bolt points though

http://www.facebook.com/#/profile.php?ref=name&id=100000185677338

http://www.cardomain.com/ride/3124271


Return to “HOW-TO / DIY”

Who is online

Users browsing this forum: No registered users and 4 guests