DIY Cruise Control under $25.

[thehunterooo]

ive got to order mine still, maybe in 2 weeks or so

[Manorness7]

Yeah I did this to my car awhile back, I mounted the switch control under the ashtray. You get use to it after awhile and you forget that it's suppose to be on the steering wheel.

[thehunterooo]

yeah theres alot of space underthere, i put all my trash and stuff in the ashtray cubby and i cleaned it out the other day, found a $5 in there

i would still want to mount it and make it look decent, i like it on the windsheild wiper control like that though, i got yellow zip ties too

[chad396a]

how did u hook it up to the cruse control box? there are 4 prongs coming out of it and only two wires. did u hook the all up or leave some un-hooked?

[WOLFMAN AK907]

There's only 2 wires on the switch, you just splice those into the green and white wires listed above. That's it! Nice and easy.

[Monzaveo]

how did u hook it up to the cruse control box? there are 4 prongs coming out of it and only two wires. did u hook the all up or leave some un-hooked?

You'll have to expiriment...one install I read said it was the 2 outside set of pins...but mine only worked on pins 1 and 3. (not sure which side I referenced that from so you'll have to experiment). I had mine connected in different combo's before I found one that would work, nothing broke trying.

So yeah, your only connecting to 2 of the 4 pins.

[chad396a]

all right thanks that's all i needed to know. i ordered it and now i can make it work.

[chad396a]

Well I got the plug today and went to install it. I don't got any green wires coming out of that plug I hooked to the same locations as the pic and my gas petal didn't accelerate any more. It did that after I pluged it to the switch and tried. I'm not sure what ones to tap into. I had to unplug it and un hook the wired to get my gass back. Any suggestions?

[WOLFMAN AK907]

I'll have to look under my dash again when I get off work today. I'll get back to you later tonight.

[AveoRob]

edited