impact gun

Post you HOW-TO and DIY threads here.
User avatar
one_man_jam
Posts: 169
Joined: Mon Sep 14, 2009 11:08 am
Location: Flagstaff, AZ

impact gun

Postby one_man_jam » Sun Aug 22, 2010 2:14 pm

i'm looking at buying one to tackle most automobile related tasks.
so far i'm torn between two that i found at sears which are the best deal i have found so far.

they are both craftsmen brand and come with two batteries
one is 149.99 and is a hexagonal driver doing 125 ft/lbs
the other is 169.99 and is a 1/2" driver doing 200 ft/lbs

i'm leaning towards the 125 ft/lb model because i don't want to buy the adapters to make the 1/2" driver fit the 1/4" sockets that i have, but i don't know if 125 ft/lbs is a good amount to handle most jobs.

:? so 125 vs 200 or should i be looking for one that puts out more torque??

UR Canada goodies installed and available here http://ultraracingcanada.com/?q=catalog/27
ImageImage

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: impact gun

Postby Petrified.Rabbit » Sun Aug 22, 2010 3:00 pm

Neither of those will do wheel lugs.

I use a snap on air powered 1/2 impact. But I bought a cheap ass corded 1/2 impact so I don't always have to turn on the air compressor. I have been quite pleased with it. And for the $40 I paid, you can buy a few sets of sockets to get whatever sizes you need.

You talk about 1/4 stuff though so it depends on what you are rearing apart. If you are using it for body tear down and not mechanical as much. Buy a true 3/8 battery impact, I think makita and Bosch make them. It will gave more umph than the smaller one your looking at but ve able to have sockets for smaller headed bolts as well

User avatar
WOLFMAN AK907
Posts: 1008
Joined: Sat Sep 12, 2009 2:38 am
Location: Fairbanks, Alaska
Contact:

Re: impact gun

Postby WOLFMAN AK907 » Sun Aug 22, 2010 5:07 pm

If it's just something you will use occasionally I would tell you to look at HarborFreight.com. They're rediculously cheap, but if it's something you will need to use every day I would look at Snap-on, Mac or Matco.
Farthest North Aveo: Fairbanks, Alaska
ImageImageImage

User avatar
one_man_jam
Posts: 169
Joined: Mon Sep 14, 2009 11:08 am
Location: Flagstaff, AZ

Re: impact gun

Postby one_man_jam » Sun Aug 22, 2010 6:07 pm

I don't mind it not being enough for the wheels just something to use occasionally that will have enough to get most jobs done is all. Ya I would have went to harborfreight to look but we don't have one here in flagstaff. I'll check online though. I don't think I'll be doing much body work. Mostly mechanical like regular maintenance

Thanks for the input guys. =)
UR Canada goodies installed and available here http://ultraracingcanada.com/?q=catalog/27
ImageImage

User avatar
WOLFMAN AK907
Posts: 1008
Joined: Sat Sep 12, 2009 2:38 am
Location: Fairbanks, Alaska
Contact:

Re: impact gun

Postby WOLFMAN AK907 » Sun Aug 22, 2010 8:33 pm

Yeah, for $100 on HarborFreight you could get a decent pneumatic 1/2" impact gun w/ at least 600ft/lbs of torque with an adapter set for different size sockets. I have one at my shop that works pretty good, but my girlfriend got me a really nice Snap-on one so I use that.
Farthest North Aveo: Fairbanks, Alaska
ImageImageImage

User avatar
one_man_jam
Posts: 169
Joined: Mon Sep 14, 2009 11:08 am
Location: Flagstaff, AZ

Re: impact gun

Postby one_man_jam » Sun Aug 22, 2010 8:47 pm

dang that does sound like a nice deal. i'm going to keep looking though.

I'm going to be doing my timing belt soon and i just don't want that crankshaft pulley to give me too much of a hassle
UR Canada goodies installed and available here http://ultraracingcanada.com/?q=catalog/27
ImageImage

wylee
Posts: 20
Joined: Thu Jul 29, 2010 9:55 am

Re: impact gun

Postby wylee » Sun Aug 22, 2010 11:03 pm

This is the route I'd take to a cheap 250 foot pounds...

http://www.amazon.com/Factory-Reconditi ... hi_title_1


http://www.walmart.com/ip/Campbell-Haus ... h/12534871



Some people like porter cable, some people hate 'em. Personally I've been happy with their stuff....no experience with that particular compressor though.

User avatar
one_man_jam
Posts: 169
Joined: Mon Sep 14, 2009 11:08 am
Location: Flagstaff, AZ

Re: impact gun

Postby one_man_jam » Mon Aug 23, 2010 3:33 pm

dang that is a really good deal.
i might have to rethink the air tools idea
UR Canada goodies installed and available here http://ultraracingcanada.com/?q=catalog/27
ImageImage

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: impact gun

Postby Petrified.Rabbit » Mon Aug 23, 2010 4:44 pm

You can probably get high quality even cheaper used on craigslist.

Compressor and impact.

User avatar
trempus
Posts: 109
Joined: Sat Sep 12, 2009 6:40 pm
Location: eastern passage, nova scotia

Re: impact gun

Postby trempus » Mon Aug 23, 2010 5:47 pm

why would you want to use an impact gun on a 1/4" socket, bolts that use a 1/4" socket are usually small, so they don't have that much torque

Image

2004 aveo
2006 uplander


Return to “HOW-TO / DIY”

Who is online

Users browsing this forum: No registered users and 4 guests