finally took some pics

[bansheeboy18]

O AND I WILL BE REPLACING THE TUBE TO THE RIGHT OF THE AIR SENSOR. AS OF NOW ITS A LITTLE FLOPPY FOR MY AND THAT TUBE IS LIKE $10. AND HOLY SMOKES THIS LITTLE PUPPY IS LOUD NOW, IN A GOOD WAY. IT SOUNDS MEAN. AND NO I DIDNT TAKE THAT ASSEMBLY OUT FROM MY WHEEL-WELL. BECAUSE I DIDNT FEEL LIKE REMOVING MY BOX IN MY TRUNK TO GET MY JACK AND I FIGURED THAT ONCE I TRADE IT IN I CAN JUST PUT THE OLD AIR BOX ON.

[bansheeboy18]

O I ALMOST FORGOT THIS IS WHERE I BOUGHT THAT STICKER FROM.
http://www.signnetwork.com/Calvin-Carto ... -5231.html
THEY HAVE A HUGE VARIETY OF COLORS AND TEXTURES

[Pontiac1976]

i was gonna just take it all off but that would leave 2 small holes in my hatch and that wouldve looked lame.

The part that bowtie sits's on is held on with three Philips screews, pops out of three holes. Put masking tape on the out side mixes up some fiber glass fine or expoy file in the holes let dry pel off the tape finger sand alittle over the holes with 2000 -1800 use a color match paint just on the hole with small brush tooth pick once doing all the prep work before the paint then clear, after a 24 hours use a light polishing compond. It should be all most like the holes were not there at all.

[kamikaze]

on the neck of the intake how mach of a bend do you need?
it looks like a 45 or 75?