OLD GUY BUT NEWBIE HERE - TIMING BELT??

Non-technical discussions relating to the Chevrolet Aveo and sister models (Daewoo Kalos, Daewoo Gentra, Pontiac G3, Pontiac Wave, Suzuki Swift+, Holden Barina and Chevrolet Lova).
THOMASTHH
Posts: 3
Joined: Thu Feb 25, 2010 10:41 pm
Location: SOUTH DAKOTA

OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby THOMASTHH » Sat Feb 27, 2010 4:37 pm

I just bought a 2008 Aveo5 with 40k miles. In looking around the net I see horror stories about broken timing belts and engine replacements. This happened to my Neighbor with 40k miles.
I have read through the owners' manual and checked the index, I see that the book recommends checking the the timing belt at 30k and replacement at 60k. I have no idea whether this was done at 30k. Should I just have it replaced now? The car was a rental in Colorado. I broke a timing belt on my Ford Escort '93 and it was no big deal. Apparently it is a big deal on the Aveo.

Two small irratations probably not worth the mention:
1. The clock on the dashboard is lighted for about 1 minute or less when the vehicle first starts cold. Thereafter no numbers visible. I am not a mechanic - is this an adjustment or has Chevy decided I should only know what time it is when I first set out in the morning? :(

2. Yesterday I decided to look under the hood. I pulled the lever beneath the dash and nothing happened. After yanking on it several times the hood released. Is there an adjustment a clutz can make? :oops:
Thank you for any help.
THOMASTHH


User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby Petrified.Rabbit » Sat Feb 27, 2010 9:02 pm

Welcome Back!

first, at 40k, your timing belt should be fine. Checking it is easy, just snapping the upper cover and checking the condition of the rubber, missing teeth, and tightness. Could have been done without any real expense, but i would have it checked instead of just replacing it in fear. We have members here who have made it 100k on the original belt, i myself will do it at 60k.

User avatar
thehunterooo
Posts: 944
Joined: Sat Sep 12, 2009 11:33 pm
Location: Tampa, FL

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby thehunterooo » Sun Feb 28, 2010 9:09 am

the hood release is wierd, pop off the plastic cover and you should be able to tighten it up, i accidently made mine come apart once :cry:
http://www.facebook.com/#/profile.php?ref=name&id=100000185677338

http://www.cardomain.com/ride/3124271

User avatar
Monzaveo
Posts: 56
Joined: Mon Sep 14, 2009 8:35 am

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby Monzaveo » Sun Feb 28, 2010 9:38 am

I think the timing belt horror stories, reflect a bad batch of timing belts on the 04 models.

Mine came with a Gates Powergrip that made it past the 60k mark / 3 years, and didn't seem to be in danger of falling apart, yet it was indeed showing its age and in need of replacement.
My Car runs in Hot and Frigid temps and was driven normally.

So I think you'll be fine if you simply follow the recomended intervals. Sometime before 70k replace the belt.

If your mechanically inclined I put a few pictures up on the web of what the job entails....

www.aveodiy.blogspot.com

Good Luck

THOMASTHH
Posts: 3
Joined: Thu Feb 25, 2010 10:41 pm
Location: SOUTH DAKOTA

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby THOMASTHH » Mon Mar 01, 2010 12:44 pm

THANKS ALL FOR THE ENCOURAGING WORDS.
I am going to have the dealer take a look at the timing belt - under the heading of "belt and suspenders."
I will take a shot at adjusting the hood release.
Does anyone have a thought on the bashful clock? It does not want to be seen other then the first few seconds on a cold morning.
THOMASTHH

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby Petrified.Rabbit » Mon Mar 01, 2010 1:37 pm

i would buy a new working clock off ebay, it is cheap. And from what you are saying it sounds like the lcd or whatever type of screen it has is burning out, probably an internal resister failure.

THOMASTHH
Posts: 3
Joined: Thu Feb 25, 2010 10:41 pm
Location: SOUTH DAKOTA

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby THOMASTHH » Mon Mar 01, 2010 3:10 pm

THANK YOU MR. RABBIT,
Would you happen to know if anyone has posted directions as to how to install this item? I did in fact find one on ebay <http://cgi.ebay.com/ebaymotors/08-CHEVY-AVEO-DIGITAL-DASH-CLOCK-OEM_W0QQcmdZViewItemQQhashZitem27af721023QQitemZ170447212579QQptZLHQ5fDefaultDomainQ5f100>

Buy it now at $20. I have a friend who is good at electronic DIY, whereas I am good at shoveling snow.
THOMASTHH

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby Petrified.Rabbit » Mon Mar 01, 2010 8:41 pm

it looks pretty self explanatory to me from the pictures. unscrew the cover, unscrew the clock from the dash, unplug wires.

User avatar
NYChevoo
Posts: 101
Joined: Mon Sep 14, 2009 2:46 am
Location: Brewster,NY
Contact:

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby NYChevoo » Fri Mar 26, 2010 8:20 pm

I have an 04 sedan, and ashmedly pushed the envelope on my timing belt to 91K.
He drives like a man on his way home from work!
00 Jeep Grand Cherokee
02 Chevy Suburban Z71
04 Aveo Sedan (Silver)
07 Aveo Hatchback (Active Red)
85 Mercedes 300SD

Sublimed Aveo
Posts: 72
Joined: Fri Jan 15, 2010 1:08 pm
Location: Hamilton, Ontario

Re: OLD GUY BUT NEWBIE HERE - TIMING BELT??

Postby Sublimed Aveo » Sun Apr 04, 2010 8:52 am

I replaced mine around 70k. I didnt want all the horror stories I heard to come true. I replaced the serp belt at the same time

The GREEN Machine


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 5 guests