XiaoGary's 2005 Hatchback Aveo
Posted: Sun Oct 11, 2009 5:15 am
Mods done to engine head:
1) Ported and Polished engine head
2) Shave 2mm off engine head to increase compression ratio
3) Sharpen the intake and exos ports to knofe edge to allow better flow
4) High Lift (10.1mm) 285 duration Intake and Exos Camshaft
5) ARP Head Bolts
6) Cometic 1.3mm Double Layer Copper Gasket
Mods done to engine block:
1) Daewoo Lanos (1.6) Crankshaft to increase stroke (From 73.4mm to 81.5mm) to that same of Optra
2) Forged H Beam Eagle Con Rod with ARP bolts
3) Forged Big Bored (From 77.9mm to 81.0mm) Wiseco Valves Cut Pistons 11.1:1 High compression with Moly coated Rings
4) Big Bored engine block with resleeve
Mods done to Drive Train:
1) 4.1Kg Billet Steel Flywheel (Original 9.3Kg)
2) 8lbs Clutch kit (Original 11lbs) consisting of cabon/kelvar clutch pad and opel clutch cover
3) 4.2 Final Drive Ratio Kit
4) Short shifter Kit with new top gasket
Mods done to Wheels:
1) Original 17 inch OZ Ultralegrra Gunmetal Rims
2) 205/40/ZR17 Maxxis Z1 High Performance Tyres
3) Rear 10mm Offset disc
Mods done to Braking System:
1) Front VTTR 303mm Double Ventilated Brake Rotors
2) Front VTTR 6 Pots Forged Brake Caliper
3) Front VTTR 600 degree brake pads
4) Rear 286mm Single Ventilated Disc Rotor
5) Rear 2 Pot Brake Caliper with Endless Cover
6) Front and Rear Goodridge Steel Braided Hose
Mods Done on Chasis:
1) Front Tower Summit Strut Bar
2) Front Lower Summit Brace 2 pt Bar
3) Mid Lower Summit Brace 2 pt Bar
4) Rear Boot Summit Strut Bar
5) Customised Engine Damper
Mods Done on Suspension:
1) Front 12Kg BC Fully Adjustable (preload and height) Coilover with 32 clicks shock hardness
2) Rear 5Kg BC Fully Adjustable (preload and height) Coilover with 32 clicks shock hardness
Intake Mod:
1) AEM Cold Air Intake System with HKS Reloaded sper Power Flow Filter
2) Sharpen the throttle body knife edge to allow better flow
Exos Mod:
1) Long 4-1 Cat Removal Header with o2 sensor bunk lifter (to prevent CEL)
2) Hot Bits mid muffler
3) Remus rear straight through muffler
4) 2 inch straight through mid pipe
5) Simota Exos Rubber Mounting
Exterior Mods:
1) Razzi Body Kit
2) Black Window Visor
3) Front Black Windscreen 15cm Sunshield
4) Vcool Mirage Window Film (70% in front, 40% rear)
5) Pageguard 8000 Remote Auto Start Alarm with auto boot release
6) 2 Tone Leather Seats
7) 2 X BRIDE ZETA 3 Bucket Seats for front
Other Mods:
1) Throttle Body By Pass
2) EGR Removal
3) Aluminium Thermostat Housing
4) D1Spec 16V Spark Plug Booster
5) Iridium IK16 Performance Plugs
6) Unichip Q Plus Piggy Back
7) Wheel Arch Rolling
Full Cable Hunter Bitumen Soundproof (roof, firewall, floor, boot, wheel arches)
9) Alpine 9855 + PXA H701 + RXA 701 Controller
10) AudioBank 350w rms X 1 to 12 inch Cadence 300w rms Subwoofer
11) Cadence 75w rms X 4 to front CDT Gold ES 601 component speakers (active setup)
12) JBL 50w rms X 2 to rear JBL 2 way co-axial speakers.
1) Ported and Polished engine head
2) Shave 2mm off engine head to increase compression ratio
3) Sharpen the intake and exos ports to knofe edge to allow better flow
4) High Lift (10.1mm) 285 duration Intake and Exos Camshaft
5) ARP Head Bolts
6) Cometic 1.3mm Double Layer Copper Gasket
Mods done to engine block:
1) Daewoo Lanos (1.6) Crankshaft to increase stroke (From 73.4mm to 81.5mm) to that same of Optra
2) Forged H Beam Eagle Con Rod with ARP bolts
3) Forged Big Bored (From 77.9mm to 81.0mm) Wiseco Valves Cut Pistons 11.1:1 High compression with Moly coated Rings
4) Big Bored engine block with resleeve
Mods done to Drive Train:
1) 4.1Kg Billet Steel Flywheel (Original 9.3Kg)
2) 8lbs Clutch kit (Original 11lbs) consisting of cabon/kelvar clutch pad and opel clutch cover
3) 4.2 Final Drive Ratio Kit
4) Short shifter Kit with new top gasket
Mods done to Wheels:
1) Original 17 inch OZ Ultralegrra Gunmetal Rims
2) 205/40/ZR17 Maxxis Z1 High Performance Tyres
3) Rear 10mm Offset disc
Mods done to Braking System:
1) Front VTTR 303mm Double Ventilated Brake Rotors
2) Front VTTR 6 Pots Forged Brake Caliper
3) Front VTTR 600 degree brake pads
4) Rear 286mm Single Ventilated Disc Rotor
5) Rear 2 Pot Brake Caliper with Endless Cover
6) Front and Rear Goodridge Steel Braided Hose
Mods Done on Chasis:
1) Front Tower Summit Strut Bar
2) Front Lower Summit Brace 2 pt Bar
3) Mid Lower Summit Brace 2 pt Bar
4) Rear Boot Summit Strut Bar
5) Customised Engine Damper
Mods Done on Suspension:
1) Front 12Kg BC Fully Adjustable (preload and height) Coilover with 32 clicks shock hardness
2) Rear 5Kg BC Fully Adjustable (preload and height) Coilover with 32 clicks shock hardness
Intake Mod:
1) AEM Cold Air Intake System with HKS Reloaded sper Power Flow Filter
2) Sharpen the throttle body knife edge to allow better flow
Exos Mod:
1) Long 4-1 Cat Removal Header with o2 sensor bunk lifter (to prevent CEL)
2) Hot Bits mid muffler
3) Remus rear straight through muffler
4) 2 inch straight through mid pipe
5) Simota Exos Rubber Mounting
Exterior Mods:
1) Razzi Body Kit
2) Black Window Visor
3) Front Black Windscreen 15cm Sunshield
4) Vcool Mirage Window Film (70% in front, 40% rear)
5) Pageguard 8000 Remote Auto Start Alarm with auto boot release
6) 2 Tone Leather Seats
7) 2 X BRIDE ZETA 3 Bucket Seats for front
Other Mods:
1) Throttle Body By Pass
2) EGR Removal
3) Aluminium Thermostat Housing
4) D1Spec 16V Spark Plug Booster
5) Iridium IK16 Performance Plugs
6) Unichip Q Plus Piggy Back
7) Wheel Arch Rolling
Full Cable Hunter Bitumen Soundproof (roof, firewall, floor, boot, wheel arches)
9) Alpine 9855 + PXA H701 + RXA 701 Controller
10) AudioBank 350w rms X 1 to 12 inch Cadence 300w rms Subwoofer
11) Cadence 75w rms X 4 to front CDT Gold ES 601 component speakers (active setup)
12) JBL 50w rms X 2 to rear JBL 2 way co-axial speakers.
