AveoNetwork.com Archive -- on AveoForum.com

so ive never posted here before but heres some pics of my car, enjoy

and sorry about the crappy pics most of them are from my blackberry -__-

basically ive tinted the back 5 windows full CAI, gauge cluster, full sound system, 8000k hid,s and bunch of other stuff
all done by me















comments criticism opinions ? bring it on

Very nice ride i like the led in the front

You should probably hook up your water and oil gauges. it must get annoying driving around with them pointed at 0 all the time. Nice car, I like it.

lol yeah I've managed to hook up the temp line i just haven't balls'd it up to attempt the oil pressure but thanks guys hopefully i can get some wheels soon; I'm actually considering getting the same ones as petrified rabbit, but black
then his coil kit will be next

if you do the low offset be prepared to pull your 1/4s.

ya it depends how bad it rubs and what not im okay with a little bit of poke.
i actually found a decent set of 15x8 rims +25 all around,
im curious of how they would fit? any ideas of how i could measure that out to tell how much they would stick out

measure @ 3.5 inches from the hub surface (where the studs are) out.. thats about where the wheel lip will be.

yaa i will do that thanks! whats the formula you used for that

wheel width divided by 2. to find center. Multiple by 25.4 to get mm..

outside width is the subtract offset (if +) then divide by 25.4 to convert back to inches.

then remember "to the lip" is typically @ 1/2" so you need to add that.

example:

8" rim with 25mm offset, 4" center, 101.6mm center, -25mm= 76.6mm, @ 3" in front of hub, + @ 1/2" to lip = @ 3 1/2"