Im gonna install it myself this weekend if weather is alright, should be rolling by the weekend, really hope this is 100% bolt on HAH!
D20 Tranny - Car is finally back on the road!! ITS ALIVE! :D
D20 Tranny - Car is finally back on the road!! ITS ALIVE! :D
After my horrible accident at the drag strip lol, i got a D20 tranny coming by the end of the week with 50051km's on it (thats 31100 miles) for $220 CAD.
Im gonna install it myself this weekend if weather is alright, should be rolling by the weekend, really hope this is 100% bolt on HAH!
Im gonna install it myself this weekend if weather is alright, should be rolling by the weekend, really hope this is 100% bolt on HAH!
Last edited by Nemasys on Sun Oct 18, 2009 6:54 pm, edited 3 times in total.
2004 Hatchback 2.0L Turbocharged
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
- Petrified.Rabbit
- Posts: 1254
- Joined: Sat Sep 12, 2009 12:08 am
- Location: Pittsburgh
Re: D20 Tranny on its way!
please document this very well, because if the D20 is the same as an F20? then i can look into the f28 swap... since there are kits for those.
but it will probably be more than an ss drivetrain, i keep leaning towards too soon.
but it will probably be more than an ss drivetrain, i keep leaning towards too soon.
Re: D20 Tranny on its way!
I really doubt an F28 will bolt onto the Ecotec engines. The D20 and F20 are the same gearboxes im 95% sure, the only difference between the two is i think the F20 is cable driven and the D20 is hydraulic
The F28 will bolt straight up to the 1.6 and the 2.0, but you need to prep it to able to use it.
Its a 6 speed gearbox, originally all wheel drive, you need to install a conversion kit to make it front wheel drive only, the speed sensors from our cars fit on it no problem, you also need to convert it to hydraulic and you need to make a custom mount for it.
Exist3nce (Turbo Optra on daewootech) Has the F28 installed in his car.
The F28 will bolt straight up to the 1.6 and the 2.0, but you need to prep it to able to use it.
Its a 6 speed gearbox, originally all wheel drive, you need to install a conversion kit to make it front wheel drive only, the speed sensors from our cars fit on it no problem, you also need to convert it to hydraulic and you need to make a custom mount for it.
Exist3nce (Turbo Optra on daewootech) Has the F28 installed in his car.
2004 Hatchback 2.0L Turbocharged
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
- Petrified.Rabbit
- Posts: 1254
- Joined: Sat Sep 12, 2009 12:08 am
- Location: Pittsburgh
Re: D20 Tranny on its way!
from what i have seen on http://www.v-tuning.com/ if a f20 will bolt up, then a f28 should because you can swap between the two after the preparations you already listed.
Re: D20 Tranny on its way!
Yeah, if you get a f28 prepared by v-tuning, all you would need to do is install your speed sensor on it and make a custom mount.
Im starting to get scared if the axel shafts from the D16 will work with the D20, i hope so cause else im not gonna roll this weekend lol. If the D16 axel shafts dont work, ill need to buy a set of D20 shafts and wheel hubs.
Im starting to get scared if the axel shafts from the D16 will work with the D20, i hope so cause else im not gonna roll this weekend lol. If the D16 axel shafts dont work, ill need to buy a set of D20 shafts and wheel hubs.
2004 Hatchback 2.0L Turbocharged
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
- thehunterooo
- Posts: 944
- Joined: Sat Sep 12, 2009 11:33 pm
- Location: Tampa, FL
Re: D20 Tranny on its way!
good luck, hope everything works out with that tranny
http://www.facebook.com/#/profile.php?ref=name&id=100000185677338
http://www.cardomain.com/ride/3124271
http://www.cardomain.com/ride/3124271
Re: D20 Tranny on its way!
I got the gearbox but the job is on hold for i dunno how much time, a friend helping me broke the passenger side axle shaft so i gotta buy a new one, which is like $150 that i really dont have.
2004 Hatchback 2.0L Turbocharged
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
- thehunterooo
- Posts: 944
- Joined: Sat Sep 12, 2009 11:33 pm
- Location: Tampa, FL
Re: D20 Tranny on its way!
lol dont you love friends
http://www.facebook.com/#/profile.php?ref=name&id=100000185677338
http://www.cardomain.com/ride/3124271
http://www.cardomain.com/ride/3124271
Re: D20 Tranny on its way!
good to hear and good luck!
You can't believe everything you read on the internet, after all that's how World War 1 was started.
- WOLFMAN AK907
- Posts: 1008
- Joined: Sat Sep 12, 2009 2:38 am
- Location: Fairbanks, Alaska
- Contact:
Return to “Engine / Drivetrain”
Who is online
Users browsing this forum: No registered users and 6 guests