MSD wires

krazy
Posts: 17
Joined: Mon Mar 01, 2010 9:23 pm
Location: fort collins "da fort", CO

MSD wires

Postby krazy » Wed Jan 19, 2011 10:35 pm

has anyone got high performance plug wires for the aveo? i heard that i could cut msd wires down to size to fit perfect, but on the other hand i heard that it cant be done or its too difficult. i would prefer msd ;)

[color=#KRAZY00FF40][/color]

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: MSD wires

Postby Petrified.Rabbit » Wed Jan 19, 2011 11:01 pm

you can easily shorten plug wires..

User avatar
dhomovich09
Posts: 80
Joined: Sun Nov 28, 2010 1:16 pm
Location: Exton, PA

Re: MSD wires

Postby dhomovich09 » Thu Jan 20, 2011 10:22 pm

Too bad 2nd gen's cant get a decent coil kit....
vroom vroom traction action!
'09 V5
'86 GLH

krazy
Posts: 17
Joined: Mon Mar 01, 2010 9:23 pm
Location: fort collins "da fort", CO

Re: MSD wires

Postby krazy » Fri Jan 21, 2011 1:50 pm

cool, thanks
[color=#KRAZY00FF40][/color]

krazy
Posts: 17
Joined: Mon Mar 01, 2010 9:23 pm
Location: fort collins "da fort", CO

Re: MSD wires

Postby krazy » Mon Mar 28, 2011 10:42 pm

ok i just tried to get msd wires. i went to autozone and they were having a tough time figuring this out. is there a kit i have to use and can i use the stock boots? thanks
[color=#KRAZY00FF40][/color]

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: MSD wires

Postby Petrified.Rabbit » Tue Mar 29, 2011 8:53 am

16v vw wires from a 1989-92 gti should fit fine, they might be a little long.. i would compare them before paying.


Lost of performance options then.

krazy
Posts: 17
Joined: Mon Mar 01, 2010 9:23 pm
Location: fort collins "da fort", CO

Re: MSD wires

Postby krazy » Tue Mar 29, 2011 9:37 pm

i didnt much detail, but i had my friend look into this. he found 8.7 performance wires for 4 cyliders on ebay. the company b&b make them for around $40 us w/shipping. its hard to search for this on a cell phone, cant wait to hook up my comp again.
[color=#KRAZY00FF40][/color]

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: MSD wires

Postby Petrified.Rabbit » Tue Mar 29, 2011 10:30 pm

the important part is that you can get the onto the park plug.

they have a shaft on the end of the wire, not all engines require this.

User avatar
Pontiac1976
Posts: 80
Joined: Sun Sep 27, 2009 5:00 pm
Location: Around Ottawa area - Ontario,Canada
Contact:

Re: MSD wires

Postby Pontiac1976 » Sun Apr 17, 2011 11:05 pm

Try to look under the name Bulestreak ( Standed ) use company for the end's that go in the valve cover to the plugs the other side to the coil is pretty standered for most companys. I would check with Accel, Tylor, MSD in the make up your own set witch is not to hard it's the crimp the ends just right. Oh another thing you can try if you have a set of old wires is to try to get the ends pulled out of the wire trying to not damge the end part because you will try to use it on the new wire. If it will come apart this will help silicone lube spray as you work it out.
ImagePONTIAC1976


PONTIAC
The Mark of a Great Car

PONTIAC
The Mark of a Great Car



http://www.cardomain.com/ride/3101276

krazy
Posts: 17
Joined: Mon Mar 01, 2010 9:23 pm
Location: fort collins "da fort", CO

Re: MSD wires

Postby krazy » Tue Apr 19, 2011 12:04 am

thanks for the info, its been a pain trying to upgrade the wires

[color=#KRAZY00FF40][/color]


Return to “Engine / Drivetrain”

Who is online

Users browsing this forum: No registered users and 9 guests