Page 1 of 1
MSD wires
Posted: Wed Jan 19, 2011 10:35 pm
by krazy
has anyone got high performance plug wires for the aveo? i heard that i could cut msd wires down to size to fit perfect, but on the other hand i heard that it cant be done or its too difficult. i would prefer msd 
Re: MSD wires
Posted: Wed Jan 19, 2011 11:01 pm
by Petrified.Rabbit
you can easily shorten plug wires..
Re: MSD wires
Posted: Thu Jan 20, 2011 10:22 pm
by dhomovich09
Too bad 2nd gen's cant get a decent coil kit....
Re: MSD wires
Posted: Fri Jan 21, 2011 1:50 pm
by krazy
cool, thanks
Re: MSD wires
Posted: Mon Mar 28, 2011 10:42 pm
by krazy
ok i just tried to get msd wires. i went to autozone and they were having a tough time figuring this out. is there a kit i have to use and can i use the stock boots? thanks
Re: MSD wires
Posted: Tue Mar 29, 2011 8:53 am
by Petrified.Rabbit
16v vw wires from a 1989-92 gti should fit fine, they might be a little long.. i would compare them before paying.
Lost of performance options then.
Re: MSD wires
Posted: Tue Mar 29, 2011 9:37 pm
by krazy
i didnt much detail, but i had my friend look into this. he found 8.7 performance wires for 4 cyliders on ebay. the company b&b make them for around $40 us w/shipping. its hard to search for this on a cell phone, cant wait to hook up my comp again.
Re: MSD wires
Posted: Tue Mar 29, 2011 10:30 pm
by Petrified.Rabbit
the important part is that you can get the onto the park plug.
they have a shaft on the end of the wire, not all engines require this.
Re: MSD wires
Posted: Sun Apr 17, 2011 11:05 pm
by Pontiac1976
Try to look under the name Bulestreak ( Standed ) use company for the end's that go in the valve cover to the plugs the other side to the coil is pretty standered for most companys. I would check with Accel, Tylor, MSD in the make up your own set witch is not to hard it's the crimp the ends just right. Oh another thing you can try if you have a set of old wires is to try to get the ends pulled out of the wire trying to not damge the end part because you will try to use it on the new wire. If it will come apart this will help silicone lube spray as you work it out.
Re: MSD wires
Posted: Tue Apr 19, 2011 12:04 am
by krazy
thanks for the info, its been a pain trying to upgrade the wires