09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

User avatar
HitecRednec
Posts: 93
Joined: Thu Oct 01, 2009 12:05 am

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby HitecRednec » Tue Oct 20, 2009 1:16 am

The Oopening in the reflector will have to be enlarged to accomidate the round bulb too.... Look at the photos in the DYI to see what I mean.

The HitecRednec


User avatar
WOLFMAN AK907
Posts: 1008
Joined: Sat Sep 12, 2009 2:38 am
Location: Fairbanks, Alaska
Contact:

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby WOLFMAN AK907 » Wed Oct 21, 2009 11:37 pm

Ok, my fogs and chrome rings came in today. My camera is dead, so you'll have to bear with me. I test fitted the 3000K HID bulb in the foglight housing and...it fits perfectly! Sit's perfectly flush with all the right tab cutouts and everything. Now, we will need to modify the HIDs wiring just a bit here. The rubber grommet fits the hole but not tightly, so I'm thinking I will cut the grommet off, pull the blue and black wires out of there as they do not need to be there. Now, the part we will have to get creative with is the 2 plugs on the HID itself. I think they are just a hot and ground trigger from the ballast, so I'm thinking if you snip those shorter, and put some female spade connectors on those wires you could plug them into the factory cap for a perfect seal and a factory look. Then just clip the recieving plugs the originals would've gone into and put an H3 plug in their place to plug into the factory cap. I think it'll work. I'll peel away the wire coating to see if that's indeed what they are before I hack the harness up. I borrowed one of your photos HiTecRednec as my camera has dead batteries.
Image
Image
Farthest North Aveo: Fairbanks, Alaska
ImageImageImage

User avatar
Manorness7
Posts: 197
Joined: Fri Sep 18, 2009 7:35 pm
Location: Mooers Forks, New York
Contact:

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby Manorness7 » Thu Oct 22, 2009 9:14 am

Make sure you post pictures of them after you get them installed. I want to see if I should go 3000k or 4300-5000k. Thanks wolfman.
Image

Reddemonx92
Posts: 629
Joined: Sun Sep 13, 2009 9:16 pm
Location: Orlando, FL

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby Reddemonx92 » Thu Oct 22, 2009 9:20 am

theres not even a 05 aveo in a junkyard near me
i

User avatar
HitecRednec
Posts: 93
Joined: Thu Oct 01, 2009 12:05 am

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby HitecRednec » Fri Oct 30, 2009 8:26 pm

I did the DYI on the HID in the Fog Lamp Housing Wolfman check it out and Let me know what ya think.

The HitecRednec

User avatar
HitecRednec
Posts: 93
Joined: Thu Oct 01, 2009 12:05 am

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby HitecRednec » Fri Oct 30, 2009 10:50 pm

Check out the DYI I added my HID conversion Kit to the Fog Lamp /Strobe DYI so it's a complete deal.

The HitecRednec

User avatar
chad396a
Posts: 69
Joined: Mon Sep 21, 2009 11:26 pm
Location: Myrtle Beach, SC
Contact:

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby chad396a » Thu Aug 05, 2010 2:25 am

this is my next project. after AC. Then i need the Cruse control
09 Aveo 5 LS Hatch

kamikaze
Posts: 81
Joined: Wed Jun 16, 2010 5:06 pm
Location: Long Island. NY

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby kamikaze » Thu Aug 05, 2010 2:20 pm

NICE!!!
I have to get to this after I get my tints.
Did you ask the dealer how much will it cost if they do it?
I want to try it look like it came with the car.

Oscarthagrouch003
Posts: 127
Joined: Mon Jan 18, 2010 7:31 pm
Location: Victoria Texas USA

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby Oscarthagrouch003 » Thu Aug 05, 2010 7:09 pm

those are nice^^ hids? goin in?

Ratchet104
Posts: 8
Joined: Mon Aug 23, 2010 11:56 pm

Re: 09 Aveo 5 Fog Lamp Part Confusion !!! (Must Read)

Postby Ratchet104 » Tue Aug 24, 2010 12:12 am

Hey I'm new to the forum. Just picked up a 10 aveo5 LS. I was wondering if all the wiring for the fog lights are there or do I have to run new wires



Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 2 guests