AveoNetwork.com Archive -- on AveoForum.com

where can i find them? how do i put them on? any help?

Anything for the Aveo will require modification to a Universal Lambo kit. AutoLoc.com sells some nice Lambo kits, but you could probably find some cheaper elsewhere.

ebay. get some for around 150 - 250. not the 90 degree kits, those suck. theres kits u do the drilling for ur stock bolt patterns.
cut inner fender for hinge to go up and down. proly loose the plastic fender well.
i had some on my honda. easy bolt on kit. wires are a pain. hinges worked well for the 3years i had them on! sold them tho. was gonna add on aveo but didnt wanna risk wifeys car.
also theres an aveo online with lambos and a bodykit i cant find it tho had a video.

it is the west wings aveo, the bacl one right?

buy a nice uni kit and take it to the shop

http://plaza.umin.ac.jp/~satoshi/mod01Oen.html
http://www.freecarkits.com/boltonlambodoors.htm
this site helps. its the 75 degree kit.
not the 90 dgree kit.
i had this kit. i didnt do any welds. they sell kits similar 2 this with no drill holes. that way u mak ur own.
^^^^^^^^^^^^^^ this kit on ebay 100-300 any more any ur paying 2 much

here is the 90 degree kit
i installed only one side like this and i didnt like it. had it on for about 2 months then i grinded it off. it was welded on but the welds need 2 be reinforced.

anothertip, if u find one thats bolt on it will be easier!!

price range $100-200

sold mine for $170

http://auto-parts-avenue.com/How-To-Ins ... Doors.html

I like the 180* kits from AutoLoc, but I'm not into that stuff. I'm more performance driven, than aesthetics.

i found this.. so even with a bolt on i need to cut stuff?

http://lambodoorsusa.com/ladokitchav0.html

yes. especially behind the fender where the hinge swing up into..

you wont know what needs cut until you try putting it together though.

bolt on just means to the hinge mounts not welded to the pillar, it does not mean there is enough clearance Or that it is specially design for an aveo.

something like this would prolly work. is way cheaper than the one u found on a site. its missing gas shocks. no big tho they are on ebay for $45 bucks.

there are kits like this as well that are akk blank, with no holes that way u make ur own.

http://cgi.ebay.com/ebaymotors/Nissan-3 ... ccessories

Petrified.Rabbit wrote:yes. especially behind the fender where the hinge swing up into..

you wont know what needs cut until you try putting it together though.

bolt on just means to the hinge mounts not welded to the pillar, it does not mean there is enough clearance Or that it is specially design for an aveo.

i would think for that price they would be designed for the aveo