can someone measure their front spring?

Including Wheel and Tires
User avatar
thebarber
Posts: 41
Joined: Fri Oct 23, 2009 4:37 pm
Location: kitchener, on

can someone measure their front spring?

Postby thebarber » Sat Jun 26, 2010 6:58 pm

need the measurements of the front oem spring off the strut

i need the top and bottom seat diameters measured from the center of the coil to center of coil, as well as the overall height of the spring

Image

User avatar
Chris
Posts: 88
Joined: Mon Sep 14, 2009 12:33 pm
Location: Aberdeen, Scotland.

Re: can someone measure their front spring?

Postby Chris » Sat Jun 26, 2010 8:07 pm

I'm at work at the moment but if you give me 9 hours I'll check for you. My springs had only done 3000 miles when I lowered it so the measurements should be accurate.
The only modified Aveo in Scotland!

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: can someone measure their front spring?

Postby Petrified.Rabbit » Sat Jun 26, 2010 8:54 pm

i've been digging through my stuff but haven't come across the oem springs.. will the h&r's be ok? i am boxing them up anyhow.

User avatar
thebarber
Posts: 41
Joined: Fri Oct 23, 2009 4:37 pm
Location: kitchener, on

Re: can someone measure their front spring?

Postby thebarber » Sun Jun 27, 2010 10:19 am

Chris wrote:I'm at work at the moment but if you give me 9 hours I'll check for you. My springs had only done 3000 miles when I lowered it so the measurements should be accurate.

ill be waiting ;)

Petrified.Rabbit wrote:i've been digging through my stuff but haven't come across the oem springs.. will the h&r's be ok? i am boxing them up anyhow.

couldnt hurt! so ya, if you could do yours too, id appreciate it
Image

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: can someone measure their front spring?

Postby Petrified.Rabbit » Tue Jun 29, 2010 10:19 pm

just sent you an email..

User avatar
thebarber
Posts: 41
Joined: Fri Oct 23, 2009 4:37 pm
Location: kitchener, on

Re: can someone measure their front spring?

Postby thebarber » Wed Jun 30, 2010 10:21 am

Petrified.Rabbit wrote:just sent you an email..

got it, thanks

just need to convert your measurements to inches, lol ;)
Image

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: can someone measure their front spring?

Postby Petrified.Rabbit » Wed Jun 30, 2010 11:29 am

just keep in mind the spring is much shorter than stock..



Return to “Brakes / Suspension”

Who is online

Users browsing this forum: No registered users and 37 guests