Brake drums and Studs

[Petrified.Rabbit]

wait post pictures of your spacers..

[XJCasper]

They look like this if the link pulls up correctly

http://store.allsprings.com/shared/Stor ... rings&All=

[Petrified.Rabbit]

these? bolts and a second set of holes?

[XJCasper]

Those are them

[Reddemonx92]

those are really big spacers.... do you even use 30mm spacers?

[Petrified.Rabbit]

if you hace those the i think you are going to need to cut studs and use shallow nuts. to do this i think you need to measure the depth of the hole before the conical seat starts (in the spacer) and the buy nuts as close or under that as possible. you can shave down the nuts too. but separately not on the stud..

otherwise i would say return / exchange them for single hole / non adapter style and run longer studs.


when you decide post i can give you a few steps to help you..

[XJCasper]

I have the 20mm spacers





Thank you Rabbit
What a waste of money. Should have gone with the cheaper ebay bolt on things

[Petrified.Rabbit]

20mm is just a hair narrow, if you got 27mm you would have been fine if you also got nuts.. or 25mm and shaving two threads off the stud..

[XJCasper]

Don't remind me. Went to the 20mm spacers to avoid rubbing when you finish up those coilovers.