Getting rims, need help!

[subachad]

here is the clearancing i was talking about earlier where the tires rubbed a little.

[g30360]

did I miss that post?

[Nemasys]

With stock height you will not rub with any wheel/tire combo (there are limits of course), hell you could fit 18's in there with the stock suspension.

I have some rubbing when turn hard to the left, but im also running 17 inch wheels (205/40/17) with a 4 inch drop.

That same 4 inch drop does not rub on my stock 14 inch wheels with my 195/60/14 winter tires.

[Oscarthagrouch003]

no more rub 4 me. sledge hammer!!! have 18s 215/35/18

[g30360]

Today I test fit some 15's 6.5" wide rim 205/50/15

[WOLFMAN AK907]

How'd they feel?

[g30360]

I didn't get to drive. The front wheel would not go on all the way. These are not the wheels I am putting on but will I need spacers for the slipstreams? I think I might be able to get them made at my work. but what size?

10 mm all around with longer bolts?

[Petrified.Rabbit]

thats something you dont want us just guessing at.

measure. go buy a dozen or so 2mm machine washers, and stack them on the studs until you have enough clearance. i wouldnt go too much on the front, because my 7" wheels with a 35mm sits very close to flush with the fender, any more and it will rub i think.

[WOLFMAN AK907]

Yeah, anything over 5mm you will want longer studs for. You shouldn't need much though, it wouldn't clear the caliper? That's odd.

[AveoSwagg09]

no more rub 4 me. sledge hammer!!! have 18s 215/35/18

Ha im riding a 215/40/18 on Eibach Springs no rub ceptin front on deep dips but i got my rear fenders rolled and they are 18x8 so a lil wide for our front end.