Page 1 of 4

Getting rims, need help!

Posted: Wed Mar 17, 2010 8:15 pm
by g30360
I need to get some new rims soon, its time to take off the winter wheels and I don't want to put on the stock all season wheels, I am currently trying to sell them locally.

But here is what I want, I have never bought wheels for any car I have had so bare with me.

I want 15"

I would like the possibility to lower in the future (not much maybe 1'"?)

I would like to be slightly taller and wider then stock. (not worried about speedo. being off)

A wider stance overall would be nice.

I don't want any rubbing!

this is what I am looking at right now on ebay

http://cgi.ebay.com/ebaymotors/15-ROTA- ... ories#shId

it does have tire options,

what do you guys think of the tires it comes with, or the rims?

any suggestions or advice?

Re: Getting rims, need help!

Posted: Wed Mar 17, 2010 9:03 pm
by subachad
I have 15" Rotas with 205/50/15.

Image

Chad
http://www.uniquemotorsports.com

Re: Getting rims, need help!

Posted: Wed Mar 17, 2010 9:03 pm
by AveoSwagg09
Rims are nice but for me i think the tires are alil narrow for a 7 in rim. I like a more squared off look so i would use a 205 or so but if to just get rolling 195 will work fine.

Re: Getting rims, need help!

Posted: Wed Mar 17, 2010 9:11 pm
by g30360
Ya its only $40 more to upgrade to 205

Re: Getting rims, need help!

Posted: Wed Mar 17, 2010 9:41 pm
by WOLFMAN AK907
Nice rims. Definitely run 205/50/R15's. Also check your local Craiglist, because Honda owners sell Rota Slips like hotcakes on there...pretty cheap too.

Re: Getting rims, need help!

Posted: Wed Mar 17, 2010 10:09 pm
by g30360
I am thinking of going new. AND after a bit more searching I found 16s IN CANADA, unless its fake or something because the eBay account seems a bit sketchy, no recent sales.. but I guess some people dont always sell.

ROTA WHEELS SLIPSTREAM 16”X7.0” / FULL ROYAL GUN METAL
4X100 – 40mm BACK SPACING --- Light Weight 13.8 Lbs.


What type of tires would work good on those?

Re: Getting rims, need help!

Posted: Wed Mar 17, 2010 11:17 pm
by WOLFMAN AK907
205/40/R16's.

Re: Getting rims, need help!

Posted: Thu Mar 18, 2010 5:28 pm
by g30360
Am I going to rub if I go with 205/45/R16

The sets on ebay all come with those. still deciding if I should get just rims off ebay and get tires here, (have a decent source for that.)

Re: Getting rims, need help!

Posted: Thu Mar 18, 2010 5:50 pm
by WOLFMAN AK907
You would be about an inch wider and .6" taller. You shouldn't rub, unless you drop then you would. Speedo would be 1.2mph faster @60mph.

Re: Getting rims, need help!

Posted: Thu Mar 18, 2010 5:53 pm
by g30360
Thanks for all the help, I should have something finalized in a few days