AveoNetwork.com Archive -- on AveoForum.com

Im looking to buy a set of rims with a staggered offset in a 15 or 16in size ive looked and fell in love with this design:
KONIG CANDY


Does anyone know where i can get a similar design wheel in different offsets?

im trying to talk with konig to see what they have but other options are welcomed

heres some wheels i found earlyer pretty cheap for brand new. there a bit bigger size

http://motors.shop.ebay.com/streetguyti ... op=2&_sc=1

For staggered offset rims that are affordable you should check out Rota and Drag. Rabbit has staggered offset Drag DR20's, but he had to do a little "body modification". I was trying to get some staggered Rota Slips, but they blew me off.

pulling a 1/4 panel that small out 1 1/4" is a "little" body modification?

i think i am going to go a little further before i repaint them.

I have 18x8 and dropped on eibachs with a 35 offset all around so body mod isnt a major concern i just want a good staggered look in the size i want.

5 spoke range wheels by revolution competition come in 15x6, 7, 8, and 9..

https://wagen-wheels.com/products/Keski ... -66-3.html

Found these what do you guys think about the offsets remember bodywork not much of a problem but i am trying to minimize it.

Not going to lie probably stretch the rears with a 215/40 which doesn't look too crazy from pics.

what u think?
http://www.tyrestretch.com/9_215_40_R16/

those wheels are really nice.. my friend has a set.

depending on which size offset you go with it will look killer.

i want get a set of xxr 501's in that dark red but idk what offset with work without pulling the 1/4's.. what do you guys think?

on what width rim? on a 7" rim i would say @ 20-25mm offest is as low as you could go without pulling.. but you should measure.