*********

User avatar
Rainbow1616
Posts: 30
Joined: Mon Sep 28, 2009 1:07 pm
Location: Pittsburgh, PA

Re: Rear View Camera

Postby Rainbow1616 » Mon Oct 19, 2009 10:53 am

LarsBud wrote:I got a cam with my Stereo, but never hooked it up. If I would have I'd mount it in my bumper.



Looking to sell it?


User avatar
LarsBud
Posts: 147
Joined: Mon Sep 14, 2009 8:17 am
Location: Waterloo, Ontario, Canada
Contact:

Re: Rear View Camera

Postby LarsBud » Mon Oct 19, 2009 12:43 pm

Sure, I have no need for it.

User avatar
Rainbow1616
Posts: 30
Joined: Mon Sep 28, 2009 1:07 pm
Location: Pittsburgh, PA

Re: Rear View Camera

Postby Rainbow1616 » Mon Oct 19, 2009 1:35 pm

WOLFMAN AK907 wrote:I have one for my aveo, just haven't installed it yet. I just bought one that bolts with your liscence plate bolts at the top of your liscense plate.


I thought about that kind but what keeps someone from taking out the 2 screws and taking it?

User avatar
Petrified.Rabbit
Posts: 1254
Joined: Sat Sep 12, 2009 12:08 am
Location: Pittsburgh

Re: Rear View Camera

Postby Petrified.Rabbit » Mon Oct 19, 2009 2:20 pm

use tamper proof bolts that you need a special tool for?

safety torx for one? you need a special tool to put in and remove

the also make screws that you can only tighten and not back off..

or or rivet it on there... and then you would need a drill and grinder to get it off..

AveoRob
Posts: 84
Joined: Tue Sep 22, 2009 9:04 am

Re: Rear View Camera

Postby AveoRob » Mon Oct 19, 2009 3:19 pm

edited
Last edited by AveoRob on Wed Jul 14, 2010 3:14 pm, edited 1 time in total.

AveoRob
Posts: 84
Joined: Tue Sep 22, 2009 9:04 am

Re: Rear View Camera

Postby AveoRob » Thu Jan 14, 2010 4:02 pm

edited
Last edited by AveoRob on Wed Jul 14, 2010 3:01 pm, edited 1 time in total.

User avatar
Pontiac1976
Posts: 80
Joined: Sun Sep 27, 2009 5:00 pm
Location: Around Ottawa area - Ontario,Canada
Contact:

Re: Rear View Camera

Postby Pontiac1976 » Sun Mar 07, 2010 11:06 am

Post subject: Re: Rear View Camera

Well I hooked up an actuator to the hatch so I could remove the key cylinder for a camera, but the camera I bought is too big fot the hole. So I bought a license plate mounted camera and found the pass through for the license plate lights and will be installing this finally this weekend, weather permitting. Woohoo.



So any more info or pic on the in stall Q:What the actuator Part name & part # or is it the same as the reg.doors. I never in-stalled one on hatch before. Image

ImagePONTIAC1976


PONTIAC
The Mark of a Great Car

PONTIAC
The Mark of a Great Car



http://www.cardomain.com/ride/3101276


Return to “Audio / Video”

Who is online

Users browsing this forum: No registered users and 2 guests