my 2010 aveo.

[dumptaveo]

2010 aveo
Old wheels: Rotiform BLQS- 17x8 et 30
New wheels: modernline monoblocks- 16x7.5 front, 16x9 rear et 35
H&R 5mm spacers (front)
H&R 15mm spacers with extended studs (rear)
Project mu floating racing lug nuts
Ksport Kontrol Pro coilovers

[AveoJoe]

love the ride. BUT whats up with them off road lights?

[dumptaveo]

I did ralley last winter, I plan and fixing the bar by putting the hella lights down as fogs.

[AveoJoe]

ok. thats cool

[petrified.rabbit]

love modernlines, and the rotiforms. how well do the 16x9 fit under there? and more pictures of that? with the 20mm spacer that should have needed some 1/4 work. 20mm would also have an adapter spacer, correct? pictures of that too? how much stud was sticking through?

did you own a vw before?

[dumptaveo]

Thanks man,
The 16x9 rears, fit very nice in the rear. I still have to drop the car a bit more but thats going to wait until next spring. I can get you guys more pictures of the wheels and fitment later tonight. I originally ordered the 5mm spacers for the rear but they ended up being a few mm too small, so I ended up using them no the fronts. Since H&R doesnt makes 10mm spacers I went for the 15mm spacers, which means you have the pain/problem of tapping and re-tapping your extended studs through the hub,
(No adapter spacer needed.) The stock studs are 12x1.5, I believe my extended studs are 20x1.5.

No, I didn't own a VW before.

[petrified.rabbit]

i was just wondering about vw because you choose two of the more popular wheels vw owners run..

12 x 1.5 is the thread size of the stud, you must of gotten +20mm length studs.

I would love to see more pictures of the fitment. i cant see how a 16x9 with a final offset @ 20mm would fit under there without a modified fender. BUT i am lower than you. but i only have 3 1/4" sticking out of the hub and had the pull my fenders out almost an inch..

[dumptaveo]

Yeah, Im a VW wanna be lol.

correct, the length of the studs is +20mm

I can will get those pictures up asap and I do have fender work down. I pulled my liner, trimmed behind my bumpers, and rolled my fenders, pulling them will come next year when I get my proper fitment/the kinks worked out. How did you pull and roll your fenders? professionally done, fender roller, or baseball bat?

[serega12]

With rabbit I'd bet it's professionally done in his garage. nice ride, dumpt.

[dumptaveo]

Thanks serega.