silver 06 hatch

[serega12]

EDIT: THE CAR IS SOLD.

So here's what I've done to my 06 Hatch... (it's a 5-speed with about 28k miles)

Fiberglass Versus Motorsport Drift Body Kit (full kit for H/B)
Fiberglass Versus Motorsport L3 fenders
OEM style Versus Motorsport carbon fiber hood (partially painted to match the car)
OEM style aftermarket lip spoiler for 09-10 Aveo
H&R lowering springs (lowered about 1.5" in the front/ 1.4" in the back)
KYB GR2 gas shocks
MSR Style 44 17x7.5 wheels (black 5 double-spoke rims with polished lip)
205/40/17 tires
K&N cone filter
Cat-back 2.25 in exhaust (low tone) removed both resonators and replaced with shorter one, installed Twister Muffler with Magnaflow tip
AMSOil with WIX filter
Black dual halo projection headlights with 10k HID and LED strip on top
Black LED tail lights
Red lens removed and clear LED's installed in 3rd brake light (still light up red)
Projection fog lights (3k HID)
De-badged all the way around
Completely repainted the car so everything is the same paint color
Roof painted pure black to match the CF hood
Professionally tinted with 20% tint all the way around
Calipers and rear brake drums are painted black
Rear side markers are tinted with car light tinting paint
Front turn signals disconnected (original long turn signals) and painted to match the body of the car
14 inch LED sidemarkers on fenders
LED side markers, LED rear turn signals, LED back-up lights (actually bright enough to light stuff up)
Blue LED in my dash and in HVAC panel to match my Sony Double-DIN deck color.
Sony headunit/Infinity speakers/PolkMOMO amp/sub
Clifford alarm with remote start
Rain-X Latitude Wipers front and back

Comments welcome!

My Full Versus Drift Kit and MSR Style 044 rims



Versus Drift Front Bumper, Black dual halo projector headlights with LED strip on top, 10K HID's in projection low beams, 3K HID in projection fog lights



Side view, you can see the full Versus Drift Body kit, Versus L3 fenders, and the lowering by KYB and H&R, and the 20% tint all around



LED Tail lights and Versus Drift rear bumper, OEM style aftermarket spoiler



Close up of rear Versus Drift bumper and a Magnaflow exhaust tip backed by very low sounding Twister muffler, 2.25" cat-back custom exhaust



Versus Drift Side Skirt



OEM style carbon-fiber hood (sides painted to match the rest of the paint job and the roof is pure black to match the hood)



K&N Cone Filter



My LED eyebrows



My car by Puget Sound...



Comments welcome!!!

[Beishang]

Cool Car!!! Thinking u must be very professional!!! I absolutely and totally and utterly adore u! o(^_^)o

[petrified.rabbit]

Seriously hoping that is lost in translation. but if not, maybe hell fund your free trip to china?

[PERFECT_ESL]

So here's what I've done to my 06 Hatch... (it's a 5-speed with about 28k miles)



Comments welcome!!!

or try to dim the led eyelid,,,

did the kit came with this nice fitment? any pic of the kit just put it on the first time out of the box ?

it reminds me one time i park into a stall, there was a concrete bar at the end,
and my black widow front bumper of my cr-x went beyond the concrete bar, i was like oh ****, back it up and the whole thing ripped off...

how about put bondo to fill the gap for your original turn signals? to make the turn signal disappear

[serega12]

or try to dim the led eyelid,,,

did the kit came with this nice fitment? any pic of the kit just put it on the first time out of the box ?

it reminds me one time i park into a stall, there was a concrete bar at the end,
and my black widow front bumper of my cr-x went beyond the concrete bar, i was like oh ****, back it up and the whole thing ripped off...

how about put bondo to fill the gap for your original turn signals? to make the turn signal disappear

Whatever is on the site is probably all I have for pictures. The car has been sold for a few months now.
no, the kit didn't fit too well out of the box. some drilling/cutting of the fiberglass was required. As far as the eyelids, they never made it to the final design. And a autozone didn't sell dimmed leds. Plus I didn't mind parking lights that would actually light up a few feet in front of the car with headlights off.
And for the previous comment, no, I'm not a professional, this was all for fun. A practice run to see what I want to do and what I don't on a nicer car. Definitely wouldn't do fiberglass again. Keeping original optics with upgraded bulbs.

[serega12]

how about put bondo to fill the gap for your original turn signals? to make the turn signal disappear

As for the turn signals, didn't want to permanently delete them because I was thinking about possibly getting another set of turn signals, making them clear, and putting in switchback leds.

[Troy]

The black LED tail lights. I've looked on eBay for a set but no luck. Anywhere I can get them in Australia?

[serega12]

04-08 CHEVROLET AVEO LED TAIL LIGHTS LAMP SMOKE PAIR | eBay it says they ship to Australia.

[Troy]

04-08 CHEVROLET AVEO LED TAIL LIGHTS LAMP SMOKE PAIR | eBay it says they ship to Australia.

LEGEND! Thankyou man!!!

[serega12]

not a problem.