finally pics of my VEO!!

[VeoLicious]

so finally got back from florida and took some pics of veo. lemme know what ya think. or what i could/should do .

[attachment=4:1z34qqpw]veo 001.JPG[/attachment:1z34qqpw]
[attachment=3:1z34qqpw]veo 005.JPG[/attachment:1z34qqpw]
[attachment=2:1z34qqpw]veo 004.JPG[/attachment:1z34qqpw]
[attachment=1:1z34qqpw]veo 002.JPG[/attachment:1z34qqpw]
[attachment=0:1z34qqpw]veo 003.JPG[/attachment:1z34qqpw]

[VeoLicious]

also here are some rims ive been looking at. except i would def get them painted white and pink[attachment=0:11f40xta]008%20black.jpg[/attachment:11f40xta][attachment=1:11f40xta]KMC-KM663-BK.gif[/attachment:11f40xta][attachment=2:11f40xta]Ruffracing_395_Black.jpg[/attachment:11f40xta][attachment=3:11f40xta]ruffraciong_R933_blk.jpg[/attachment:11f40xta][attachment=4:11f40xta]SPORTMAX-503-BP.gif[/attachment:11f40xta][attachment=5:11f40xta]SPORTMAX-659-SL.gif[/attachment:11f40xta]
for a while i wanted only 5 spokes but i keep changing my mind now. . . . i need opinions please.

[LarsBud]

So you are already running 15" factory rums I see. Are you planning in going up in size?

[VeoLicious]

Yeah I haven't decided yet but I'm either going 16 or 17. I can't decide what will look better. Any thoughts?

[LarsBud]

If you go up in size you will have to drop your car or it'll start looken funny. 17" are too big if you don't drop, that's what I think. You will also fined that the larger the Wheel the less you can throw your car around. Since I’m into the performance function first, I'm running with 14" ASA Racing Wheels for the better handling.

[reddemonx92]

You can do like some of house on here and paint the inside of your headlights black. and 16's i believe are the best size for the aveo

[VeoLicious]

yeah one of myf riends had suggested that too. dont you have to like put your headlights in the oven or sumthing to take them apart?? and yeah im leaning towards 16 .

[reddemonx92]

Yea you gota bake the headlight in the oven. Im not sure the temperature i used when i did mine but you have to keep it in there for like 15min for the glue to soften enough to pull apart. Just make sure u pull off all the metal clips and the rubber

[VeoLicious]

What kinda paint do I get? And like what parts do I paint? And so I would have to buy glue to put them back together yeah? Sorry for so many questions I just don't really know how to do anything involving cars, but I'm tryna learn

[reddemonx92]

You just go to autozone and buy some high temp black enamel. When you seperate the headlight there will a be a chrome peice that is screwed into the headlight housing. Remove that and only paint that chrome part of the headlight. screw back in put both pieces back in the oven to soften glue then reput back together. thats really all you do. Theres already enough glue to make it hold together again