LinkBack URL
About LinkBacks
PU-DELyou never answer my question until now,,,
i went to the local junk yard and got one,,, black, $100
you never answer my question until now,,,
i went to the local junk yard and got one,,, black, $100
that's a good deal, it would have cost me $100 just to ship mine
the tach stopped working as well,,
as well as the speedo,,,, this time,,
tach is back to not working...
where shall i check first?
http://vancouver.en.craigslist.ca/rds/pts/2519121998.html
will this gauge works? mines is a 09 standard transmission
the dash is right, you would need the gauge surround. i cant say its 100% fits only because "something" might be slightly different because it uses the old engine, but that car (being an 0should have the newer style body harness, so it should plug in.
my own tach and speedo is not working,,,
where shall i check first?
i have just done making an angel eyes LED on my fogs,
and LED side marker and signal to replace the amber reflector,
and some white LEDs for the outer light compartment (where the stock turn signal is)
tomorrow, i will get it insured, and start using it
but my tach and speedo is not working,,, where shall i check first?
i tried un-stuck the tach needle, it worked once( but didnt check speedo), but next time it fails again, tach stays on 0, and speedo not working (had the car on the hoist, and fully engage clutch on 4th gear. speedo not moving fuel gauge and water temp gauge works, the cluster ligts works
The speedo not working could be the speed sensor or broken wire. A good scan tool would be able to tell you. If thhe speed shows up on the scan tool when driving, the sensor is good and more than likely the cluster is bad. If the speed doesn't show on the scan tool, it would mean a bad sensor or broken wire. I hope this helps.
I leased Pontiac Wave from September 2006 to August 2011.
what kinf of scan tool, buddy
the scan thing to find the engine code?
i have access to some tools from a shop, but the pros are not gonna help me anything, they just lend me the tools....
needles stucked, case closed, again,
haha,
that transparent ring on the gauge stuck the needles,
how to change the color of the dash light?
the bulbs are non-colored, they must be go thru a green screen or something....
and how to add a beeeper to the shift light?
all rice
Posting Permissions
Reply With Quote