07 Aveo Throttle Body Problem?? (Link to video also)

[volta]

aveo - YouTube

I'm having a trouble finding out what the problem with my GF's car is. Egine light codes are P161B, P2106, P2110. The car starts and runs really rough, steping on the gas pedal does pretty much nothing. It will accelerate to about 1500 rpm's...and thats when I'm flooring it

check engine light code states its a throttle position sensor issue.

I first removed and cleaned the throttle body, reattached it made no difference. I was told the sensor is a part of the throttle body as a whole so I bought a replacement. I attached the new one and have the same exact performance. Any help or advice would help us save money and be appreciated.


Link to video of car is pasted above and below.

FOUND PROBLEM. IT WAS A HOSE LEADING TO MAP SENSOR THAT HAD BROKEN COMPLETELY IN HALF. Those codes had me looking everywhere but there. LIVE AND LEARN.

[Chevy Customer Svc]

Hey there volta,

I'm sorry to hear of this concern with your Aveo. If you would like, I will look further into this concern for you. Please send us a private message with your full contact information, VIN, and current mileage is my assistance is needed. I look forward to hear from you soon!

Kristen A.
Chevrolet Customer Care

[Pontiac1976]

Question when you put on the new Throttle Body . Did you take the batt cable off leave it of 3mins reconnect it then try it. re-scan.
so it will read the new Throttle Body. Are you getting any new codes.

[volta]

Question when you put on the new Throttle Body . Did you take the batt cable off leave it of 3mins reconnect it then try it. re-scan.
so it will read the new Throttle Body. Are you getting any new codes.

I found the problem. It was not the throttle body or position sensor. There was a hose leading to the MAP sensor that was boken clean in half. Replaced it and it works fine now.

[AveoJoe]

Hose? To mapsensor?

[jayman]

its nice when people post what fixed the problem. thanks

[volta]

Hose? To mapsensor?

see image I have posted.

[haynayboy]

I am having the exact same issues. i'm sorry but I can't seem to see where that is located from your illustration so I can check that one myself.

[Daox]

Its right on the front of the intake manifold. Here is a picture:

[haynayboy]

ok thanks will check that out as soon as I get home.