•  
    Results 1 to 7 of 7

    Thread: 2006 Aveo, Cranks but no start

    1. #1
      What's wrong with my car?
      Join Date
      Nov 2018
      Location
      Central Point
      Posts
      5
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Question 2006 Aveo, Cranks but no start

      To start off, Thank you for the add...

      I have already stumped my mechanic friends lol... back ground on the 2006 Aveo, Lady I got it from said she drove it to the store, came out and would not start... She took it to the shop and they put a few new parts on it, CPS, O2, wires, plugs, battery, and still finding parts... Fast forward to now, I towed it home and been playing with it, I'll try not to miss anything, cranks and no start, well kinda... If i go from off to start fast, it will, or try to start for the first 1-2 seconds, then no fire (spark), stills gets fuel 55psi (smell it out the pipe, plugs get wet) if I turn the key to run, wait, then start, no spark or if let off and re-start, no fire, only fires if I go straight from off to start fast... Can the cam sensor keep it from firing? Oh yeah, P0315 (CPS learn) will come on... I have 3 times grounded the + cable (re-set the ECM)



    2. #2
      Almost time to do my timing belt
      Join Date
      Aug 2012
      Location
      Northeast
      Posts
      1,409
      Thanks
      3
      Thanked 103 Times in 94 Posts
      Have you checked to see if the red/black wire coming out of the ignition switch has power when the key is at run/start?

    3. #3
      What's wrong with my car?
      Join Date
      Nov 2018
      Location
      Central Point
      Posts
      5
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      I have not checked the power wire yet, I did put in a new switch and the same thing happens. I feel that the ECM is seeing something wrong and cutting off the coils... Not sure what that could be... One more thing, I hooked up my live scanner and seen the TPS shows 19% and if I press to 50% then the TPS goes 20-21% and if 100% pressed, then 22-23%... From what i can see, the scanner is reading the TB not the peddle in the car... I'm out of town till Friday morning, so I'll check that then

    4. #4
      Almost time to do my timing belt
      Join Date
      Aug 2012
      Location
      Northeast
      Posts
      1,409
      Thanks
      3
      Thanked 103 Times in 94 Posts
      If there's power on that wire, then check cabin fuses 6 and 7.

    5. #5
      What's wrong with my car?
      Join Date
      Nov 2018
      Location
      Central Point
      Posts
      5
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Turns out... The ECM was bad... I put in a used one and it runs great, put the old one back, nothing...

    6. #6
      Almost time to do my timing belt
      Join Date
      Aug 2012
      Location
      Northeast
      Posts
      1,409
      Thanks
      3
      Thanked 103 Times in 94 Posts
      ECM is usually last on my list, and I don't recall anyone ever posting a bad one here previously. But I've also never seen a P0315 posted before either, so perhaps that code can mean that the ECM is bad. Anyway, nice to read it's back on the road, and thanks for the follow up with your resolution.

    7. The Following User Says Thank You to avguy For This Useful Post:

      AndrewButler05 (12-14-2018)

    8. #7
      What's wrong with my car?
      Join Date
      Nov 2018
      Location
      Central Point
      Posts
      5
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Time to revisit this little car... So after changing the ECM and hearing it run, I drove it around the block, it idles fine but missis when I hit the peddle around 25%-75%, like two dead cylinders under load. If to smash it full open, it seems to be okay or if you ease into, it runs fine, no miss. I gave up on this car because my kid didn't get her license, now I'm trying to fix it so it can have a new home where it will be used lol... Thank you for the help getting it this far





    Similar Threads

    1. '06 Aveo cranks, but won't start. Running out of options
      By Tw1tcHy in forum Troubleshooting and Maintenance
      Replies: 21
      Last Post: 02-08-2020, 12:32 AM
    2. Cranks but no start. Need help please
      By rajesh717 in forum General Discussion
      Replies: 9
      Last Post: 07-07-2018, 12:11 AM
    3. Car Cranks but wont start after dead battery - immobiliser?
      By alexjb1989 in forum Troubleshooting and Maintenance
      Replies: 3
      Last Post: 06-14-2018, 03:04 PM
    4. 08 aveo cranks but won't start
      By Maccrayd38 in forum Troubleshooting and Maintenance
      Replies: 0
      Last Post: 11-22-2017, 08:05 PM
    5. 2005 Chevrolet Aveo nightmare... car cranks just fine but won't start?
      By Jos in forum Troubleshooting and Maintenance
      Replies: 4
      Last Post: 11-03-2017, 05:34 AM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •