Thanks for the advice guys. My engine light was flashing but not all the time. It would flash for a min and then stop. I had the codes ran again today and it didn't show any codes. It was able to communicate with the car so I find it odd that it pulled no codes. Anyway I pulled the plug wires and blew out the holes and had a little oil but not real bad. I replaced the gasket not long ago so it sucks that there was oil. I took the plugs out and they looked good so I cleaned everything up and put it all back together. Checked the air filter and it was good and clean so I took the air tube off and sprayed a decent amount of Deep Creep to try and clean things out.

After all that I took it out for a test and it seemed to run back to normal. I assume it was the oil in the plug holes so there may be another gasket replacement in the near future.

Again thanks for all the tips you guys were a great help!!