I'll start with the questions first. When turn the key it does nothing. I have lights and the idiots light on the dash work. I have 12.4volts on the battery and remember it did start twice before. The curious thing i did notice before but forgot to say was that there was no check engine light. I did remove the coil pack I had to to get to the bolt in the center of the valve cover. I did not unplug it though. I undid the ground and the was enough to get the coil out of the way. All fuses are good buy the way. I did remove several of the sensors around the valve cover area so I could move the harness out of the way. Not that is out of the way here is where I stand. I went back and checked the connectors I removed during my work and pulled them off and reseated them. I "think" the cam sensor was not seated right but it appears set now. I checked the battery again 12.4volts and tried again. Now I have an intermittent check engine light and a buzzing/clicking sound coming from the cpu when the key is in the on position. The click seems to coincide with the check engine. There is obviously something not quite right I just haven't found it yet. Nothing looks out of place. I am making progress and I appreciate the help.