•  
    Results 11 to 14 of 14

    Thread: Aveo 2004 67k. Pisto Ring Replacement?

    Threaded View

    Previous Post Previous Post   Next Post Next Post
    1. #1
      What's wrong with my car?
      Join Date
      Feb 2017
      Location
      Longview, TX
      Posts
      24
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Aveo 2004 67k. Pisto Ring Replacement?

      Hello,

      I have a 2004 1.6l 67k miles aveo. I replaced the head gasket and there is a knocking. I did a compression test and gave 200 psi all four cylinders. did a leakdown test and gave air coming out of the oil dipstick. I was having a hard time finding TDC compression stroke so I used a balloon (saw a video) and gave air out for all of them ( 4 cylinders) through the dipstick (I find it a bit weird). The car runs good but it does have a knocking that increases with rev. Head engine was resurface and got new bolts. All bolts tighten at torque specs. When I turn the crankshaft I hear air going in and out noticeably but not sure if it is normal. I am thinking I need to replace the piston rings. There is no smoke coming out of the engine. is the timing bad? There is oil residue on top of each piston. Serpentine belt off. Also, there is oil getting into the combustion chamber. Pistons have oil in it. Coolant level has not dropped at all. Video of sound: https://www.youtube.com/watch?v=AgL0...ature=youtu.be. No check engine light on! I really need help and fix the car asap. Thank you in advance.

      John
      Last edited by johnlopez; 03-03-2017 at 05:44 PM.

    Similar Threads

    1. 2004 Aveo Timing Belt Replacement
      By SS2004 in forum Troubleshooting and Maintenance
      Replies: 1
      Last Post: 01-29-2017, 02:10 PM
    2. Aveo 2004 :: 2004 Chevrolet Aveo (Garage entry)
      By MetroMPG in forum Members' Aveos / Garages
      Replies: 0
      Last Post: 12-18-2014, 03:26 PM
    3. IAC O-ring part number?
      By SpiffWilkie in forum Troubleshooting and Maintenance
      Replies: 1
      Last Post: 07-18-2013, 04:21 PM
    4. Exhuast ring??
      By jriggs87 in forum Engine & Drivetrain
      Replies: 5
      Last Post: 08-24-2011, 02:52 AM
    5. Measing piston ring clearance
      By Nemasys in forum General Discussion
      Replies: 4
      Last Post: 06-01-2011, 08:44 PM

    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •