Help! All i did was clean the throttle body!

[Scanman]

My 2005 LT hatch has a 2007 motor installed (THANX DAOX!) It had an erratic idle. After reading on this forum, I cleaned the throttle body & the Idle Air Control Valve, and re-installed everything. Now it has a really rough idle, loss of power, and the xmission won't shift into high gear. Hear are the codes:

P0300 fix assist,
P0113 IAT high voltage
P0201 cyl 1 injector control ckt
P0107 MAP sensor low voltage
P0700 TCM requested MIL illumination

Here's what I've already tried:

New IAT
New MAP
New Idle Air Control Valve
Pulled & checked all plugs (no problems)
Checked for fire on all four plug wires (good)

Thanx in advance for all your help!

[Scanman]

I just found my problem! I accidentally unplugged the Cyl 1 injector! That's what I get for getting in a hurry!

[Aveo5_boy]

From just reading the first post I was thinking that something must have not been installed when you put everything back together. Thanks for sharing this info as i am sure it will help me in the future to check over my work first before I buy any new parts.

[Daox]

Woo, glad to hear you got that one figured out.