HELP Clutch to start sensor!!!

[petrified.rabbit]

its on the pedal, at the top, its a "release" switch. unplug the wire, and then it will either work jumped, or unhooked, depending on ho the wiring works. So unplug it, and ry to start it, then just the two wires with a paper clip and try to start it.

If the paper clip is needed wrap it in tape or something so it doesnt ground out.

[djeepmyers]

its on the pedal, at the top, its a "release" switch. unplug the wire, and then it will either work jumped, or unhooked, depending on ho the wiring works. So unplug it, and ry to start it, then just the two wires with a paper clip and try to start it.

If the paper clip is needed wrap it in tape or something so it doesnt ground out.

yes i went to do that and found the switch, it wont start unglugged. i did get the car to start but i still want this dissables for my autostart that came in today. there are actually 3 wires from the switch. a blue, orange, and brown. i tried a paper clip between every comonation of two wire possible. all three wires need to be connected to something. but idk what. any ideas?

[djeepmyers]

oh and btw i have an 09 aveo 5 hatch, idk if that helps shed some light onto this situation?