Ok so after many blood rushes to the head from sittin in my seat used down, I have found that there is no sensor
At te top of the pedal. The ONLY sensor is the clutch position sensor. The one with the three (orange blue and brown wires). I cannot find any white plug under there with a yellow an purple wire. I played with the sensor on the clutch. When I unhooked it from the pedal and just pushed/turned the sensor it allowe the car to start. So I feel me battle lies there. I think the 09 aveo5 hatch might be different from what ur talking about, or I just can't find what u r referring to. I believe the sensor on the clutch is some form of potentiometer. When I unplugged it, the car wouldn't start, and when I plug it back in, the car still refuses to start for a period of pushing the clutch in and out, trying to start and temping the keys from the ignition. It's a poor design in my view. A simple push button switch would have worked all the same and would be jump able. Can you either post a picture of an 09 or newer and show me where the white plug is supposed to be or fracture to me better. I can't seem to find a wiring diagram ANYWHERE and I m not paying for alldata online. Does anyone have alldata that could send me wiring diagrams for an 09 aveo 5 hatch. Please help me, I finally got the guys to work schedules around so we have all of Tuesday to put the autosart and keyless entry in. I need to disable this so I can start the car without clutch by then (and yes I know an autostart in a standard isn't recommended, believe me I ve heard. I m including a relay box that causes the car to honk instead of start I it is in gear.)