I finally finished my 2008 Aveo5 with these bushings, they seem to working very well. Once I was able to remove the old bushings and sleeves they went in just like a normal one would. I did have to taper the end of the new bushing sleeve just a bit with a grinder to be able get it started into the axle but once it started it went very well. I did both bushings and I am very pleased with the results. These new bushings seem to be built better than the original ones so I hope they hold up a lot longer (the original ones went bad with only 29K miles). I tried to attach some pictures to this message but it doesnt seem to like that so if anyone wants some pictures of the bushings in the axle let me know and give me your email and I will send them to you. Here is the link to bushings that I used Your Parts Search Returned 1 Part(s) Paid about 45 for two bushings and shipping, a whole lot better than over $500 for a rear axle because a couple of $15 bushings went bad, way to go GM, good to see you are taking care of your customers like that.