•  
    Page 6 of 6 FirstFirst ... 456
    Results 51 to 57 of 57

    Thread: i need help with the rear control arm bushing !

    1. #51
      What's wrong with my car?
      Join Date
      Jul 2010
      Posts
      5
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Thanks p.r!

      Do you mean I wouldn't need to use a press for the vw bushings as opposed to the eBay set? They are less expensive than the cross-fit models on eBay by ~$20, but I would rather have the ones that go in the easiest.



    2. #52
      Lifetime owner
      Join Date
      Sep 2008
      Location
      Pittsburgh
      Posts
      8,013
      Garage empty: add car
      Thanks
      2
      Thanked 171 Times in 142 Posts
      you "need" a press for both, however, you can get buy using a large c clamp, or something similar like most of the DIY threads that replace these bushings. Mostly because to use a press, you would need to take the axle out all the way, and a C clamp or similar will allow you to just prop the front of the axle up will the struts, and such hang the back side in the car.


    3. #53
      What's wrong with my car?
      Join Date
      Apr 2012
      Location
      new lenox il
      Posts
      1
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      I have a 2008 Aveo with the same problem. It only has 37000 miles on it and the bushings are already shot. My sister had the same thing happen to her 2009. This must be a problem specific to the Aveo. I feel the dealer should repair this under warranty. I will let you know what they say when I see the dealer Monday.

    4. #54
      What's wrong with my car?
      Join Date
      Jul 2010
      Posts
      5
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Thanks rabbit. I was kind of foolishly hoping I could just slide them in with grease if they were the right diameter. Most likely I'll have to have someone do the install for me. I'm gonna buy the newer 6R0501541A bushings as I've read on VW forums that these are what people are using instead ofMeyle 1J0501541C because they have more rubber padding between the metal rings. From what I've read both are the same size, so hopefully they'll last a while. I'll try to put up pix of them when they arrive.

    5. #55
      What's wrong with my car?
      Join Date
      Mar 2017
      Location
      New Hampshire
      Posts
      1
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Does anyone have pictures or how easy bushings were to install? 2006 aveo 207,234 miles

    6. #56
      Lifetime owner
      Join Date
      Sep 2008
      Location
      Pittsburgh
      Posts
      8,013
      Garage empty: add car
      Thanks
      2
      Thanked 171 Times in 142 Posts
      IF you have never changed a bushing in any control arm, it is hard to say if it is easy or not. Usually taking the old one out is 90% of how hard the job is... I've had some come right out, press out easily. I have had to torch, cut, hack and saw out some (multiples of these methods on tough ones). I have also broken a few arms trying to press them out.


    7. #57
      Should I keep it?
      Join Date
      Sep 2013
      Location
      Hurricane, WV
      Posts
      98
      Thanks
      6
      Thanked 6 Times in 5 Posts
      I am going to try and change the ones in my wife's 2007 Aveo5 tomorrow. I bought the Moog bushings from RockAuto.com a couple of years ago but have kept dreading the job. I can wait no longer. I will try to post some pictures. BTW, the car has 332,300 miles on it - 5 spd manual.





    Page 6 of 6 FirstFirst ... 456

    Similar Threads

    1. bad lower control arm
      By NYChevoo in forum Wheels, Tires, Brakes & Suspension
      Replies: 15
      Last Post: 11-08-2013, 09:14 PM
    2. cruise control
      By deniswhite1 in forum General Discussion
      Replies: 13
      Last Post: 02-15-2013, 11:43 PM
    3. Polyurethane engine mount bushing upgrade
      By thehotrodguy in forum Engine & Drivetrain
      Replies: 8
      Last Post: 07-28-2010, 12:22 AM
    4. 05 cruise control
      By ascrewsloose in forum How-To
      Replies: 1
      Last Post: 09-09-2009, 04:01 AM
    5. Replaced Control Arm Bushing
      By subachad in forum Troubleshooting and Maintenance
      Replies: 6
      Last Post: 03-24-2009, 02:31 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •