No spark, no fuel... only codes are for Throttle body and sensors

[Poptart133g]

Checked all the fuses and relays and all the cables(sorry, should have put that in my first post). I can't get to the car at the moment, since I left it where it broke down at, but tomorrow I'll check all the grounds. I get an error for tps not sensing the trottle pos. when I hooked up the old one I took out, so I know that was atleast an issue, but I'm wondering if the crankshaft pos. sensor also failed, causing the ignition problem. It's unlikely, but it's the only other thing I can think or right now) I'm going down to check the inertia switch to see if that triggered when the car went into failure mode, when it couldn't sense the throttle pos.

I'm starting to think that the error codes don't have anything to do with the current problem, but are just something I can't quickly clear without a flash. I could see bad things happen if the TPS couldn't detect the throttle position, and someone just cleared the failure mode and tried to drive, not knowing the throttle was for instance, stuck open.