No start just like the other guy..

[randyw]

SHE'S ALIVE!!!! After replacing the valve cover gasket, plugs, and plug wires she still wouldn't start. Turns out those components were all in bad shape and I'm glad they've been replaced but it turns out that petrified.rabbit was correct, it wasn't the cause of the no start. I ended up pulling the oil pressure sensor as suggested, cleaning the sensor and connector ends off, and reinstalling it. Had to jump start it but she fired right up! I'm a little puzzled as to why this caused the no start though. Anyway, thanks to everyone for your input and hopefully this info will help the next guy having this problem. Thanks again everyone!

Pic shows the plugs in the condition in which they were removed.