Throttle body GM 55561495 OEM vs NEW disassembled view

[AUSCE]

Hi I have to change TB from my ECOtec 1.6L Pontiav G3 2009, but the AC Delco is a better piece to change it?, mi fuel average are very worst....

Or exist a better option?...

pleas search te part # here...

RockAuto Parts Catalog

ACDELCO Repuesto # 55561495

[AUSCE]

nobody?, bump!!

[ontarian_frog]

The AC delco would be your only option. I'd call a dealership, sometimes, they sell parts cheaper than aftermarket companies do. There is a fat chance AC Delco is the manufacturer of the genuine part too.

[AUSCE]

Today i´m going with an GM service center, and tell me, mabe requires calibrate the Throttle bod, y hope this worst, because they tell me the ralenti was inestable and they can correct it, i hope so...

Because that repair cost abut 46. usd....

Versus the 630.00 usd cost from TB at the GM dealer, its a thief...

I´m gonna doit the thursday..

[AUSCE]

Traductor




On Thursday I took the car to the throttle body calibration without thier told me they repaired the connector, it loses voltage, and this raises the throttle body does not respond as it should ....

My consumption improved significantly as well, the car feels much better, throttle response, I was finally satisfied with the service, the car to accelerate, seemed to suffocate, ie the car and was vacuuming and the kite would not open this situation was solved with this service the cost was 26.00 usd ....

Anyway, talk to your service, I found online for as ideally change the connector ...

The told me that it opened and again tighten the harness connectors that vivraciones lose heat and generate tension and signal errors and false contacts, I'll ask anyway idle calibration for these effects and it is 100% ...

For now the car idle only fails when I fill the fuel tank when parked upside down and bent ...

I think this was verified that my throttle body did not fail, and I was told that the throttle body needs calibration fails and dirt from ensusciarpor and this generates errors kite position ...

[HeavyDuty]

Traducto


On Thursday I took the car to the throttle body calibration without thier told me they repaired the connector, it loses voltage, and this raises the throttle body does not respond as it should ....

My consumption improved significantly as well, the car feels much better, throttle response, I was finally satisfied with the service, the car to accelerate, seemed to suffocate, ie the car and was vacuuming and the kite would not open this situation was solved with this service the cost was 26.00 usd ....

Anyway, talk to your service, I found online for as ideally change the connector ...

The told me that it opened and again tighten the harness connectors that vivraciones lose heat and generate tension and signal errors and false contacts, I'll ask anyway idle calibration for these effects and it is 100% ...

For now the car idle only fails when I fill the fuel tank when parked upside down and bent ...

I think this was verified that my throttle body did not fail, and I was told that the throttle body needs calibration fails and dirt from ensusciarpor and this generates errors kite position ...

Ok did everyone get all that ?

[AUSCE]

Ok did everyone get all that ?

I commented, first the car started to fail, but the problem is still not in the throttle body, insist that it is in the connector ....

The technician told me that the throttle body endurance and showed this was due to vibration, the connector loses tension, but I adjusted.

However after this repair significantly improved vehicle reviews, comparing with the previous review of pollution control, the hydrocarbons decreased from 50 to 0.7 and the oxygen that was nonexistent appeared in measurements, the smell of gasoline almost disappeared ...

As I mentioned with the same dealer I talked to him about these two issues the P2135 connectors, both set out what needs to be changed is the connector. He insisted there.

But what happened, after adjustment of the connector, as enunciated greatly improved the engine revolutions stabilized mostly, but the fit was only light connector and introduced faults.

On January 14 return to dealear and they did a software update and it seems all right, on Friday again, failure to file, I still insist that the connector should be changed.

It is a fact that the distributor in Mexico do not have it in stock and may therefore be reluctant to change.

Well I think speak for another review ...

although I've found a lot of error P2135 and all the connector indicates change, tell me that the engines are iguals, however I do not understand why they are different, the error is given by the same...

Error code P 2135 throttle position sensor.....Anyone?

http://www.justanswer.com/chevy/234y...skAQuestionNow

P2135 help!! - ChevyTalk --The Social Network for Chevy Fans

Well I think speak for another review ...

although I've found a lot of error P2135 and all the connector indicates change, tell me that the engines are iguals, however I do not understand why they are different, the error is given by the same,

In case of changing the throttle body, maybe I would put this in 70mm, which is coming boreado, as seen only changes the throttle body, and kite position sensors and motor are retained OEM ...

Godspeed GSP 70mm Universal Billet Aluminum Throttle Body Adapter | eBay

[AUSCE]

Well the smoking gun in my opinion is the overall poor quality I am afraid. My car would stall without notice, it doesn't do that anymore, but your right nothing jumps out as "broken"........If I had of taken the new one apart to see what has been changed in it......that would very likely pinpoint the problem. The black plastic cover is redesigned on the new one, it houses the female electrical connection.....that's were I put my money.

Your problem desapear with the TB change?...

[AUSCE]

well i keep trying to found the connector, and in this place dont, have it...

Throttle Position Sensor Repair Pigtail Connector GM Cars and Trucks - The Repair Connector Store

but i fond this thread....

and looks like a 1.6L ECOtec conector....




if it is...

the part number is 15306119

15306119 - GM CONNECTOR

you can check if this part works on our engine, if is the same, I think it is, introducing your VIN (my VIN don't worst mabe because my car was sell it in México) at the next dialog in tho te piece menú....

"To check if it fits my car & get more parts info, click here."

Another place...

http://www.gmpartsdirect.com/results...umber=15306119

https://acdelcooutlet.com/index.php/pt1280.html

With ac delco parts I found it here but is from 10 pins...

http://www.rockauto.com/catalog/moreinfo.php?pk=82513



But I don´t know haw it replace it, because looks difrerent at the picture....

UPDATE

I keep searching and found one connector in 8 pins, here an gives me the part number at AC delco with 8 pins...

https://acdelcooutlet.com/index.php/pt1176.html

http://www.gmpartsgiant.com/parts/gm...-15305944.html



AC Delco part PT1176
OEM # part 15305944

http://www.gmpartsdirect.com/results...umber=15305944

[AUSCE]

I change al the Motor harness...

Change the oil filter piece, and the water pump, te cooling sistem was vei bad in this vehícles, almost change all, it causes the motor harness, break it and seend, bad singnals to the ECU...

Whel I apreciate your help, I sell the car, and buy an Suzuki Swift '13, best regards...