So I was able to replace the heater hose with a the clamp tool, I had to remove the battery and removed the bolts to the radiator tank and wipers but I was I able to get my hand on the hose to wiggle it but I used a pick to pull the hose to loosen it up, the radiator tank had to be loosened to get the other side of the hose off near the motor at least for myself, I had a hard time getting the clamp off there as there is very little space. Again, I used a pick to lift the hose to loosen it up btw I used the pick to grab the hose clamp by the engine firewall and that helped out, so no need to go under the car and remove the starter and all that...