•  
    Results 1 to 8 of 8

    Thread: Code P0441

    1. #1
      I'll keep it and add a turbo
      Join Date
      Feb 2012
      Location
      Virginia
      Posts
      118
      Thanks
      0
      Thanked 1 Time in 1 Post

      Code P0441

      So my check engine light comes on and I get a code P0441 with my scanner. So I replaced the purge valve on the intake manifold, the purge solenoid behind the passenger rear tire. Checked all hose routing the best I could without using some type of smoke or dye. My gas cap is only a couple years old and I can't get rid of the code. There is a hose that comes off the charcoal canister and goes up through the body trunk area. Should this be connected to something ?

      Thanks in advance



    2. #2
      Almost time to do my timing belt
      Join Date
      Aug 2012
      Location
      Northeast
      Posts
      1,409
      Thanks
      3
      Thanked 103 Times in 94 Posts
      I recently had a different evap code (large leak) and that turned out to be a bad vent solenoid. Very easy to replace that one, and I actually pulled my replacement from a yard Aveo for $2. The doc says the vent valve could be a player in the P0441 code as well. The hose you described should be attached to the vent valve, and it's supposed to be routed the way you described, into the trunk body.

    3. The Following User Says Thank You to avguy For This Useful Post:

      MetroMPG (10-05-2015)

    4. #3
      I'll keep it and add a turbo
      Join Date
      Feb 2012
      Location
      Virginia
      Posts
      118
      Thanks
      0
      Thanked 1 Time in 1 Post
      Quote Originally Posted by avguy View Post
      I recently had a different evap code (large leak) and that turned out to be a bad vent solenoid. Very easy to replace that one, and I actually pulled my replacement from a yard Aveo for $2. The doc says the vent valve could be a player in the P0441 code as well. The hose you described should be attached to the vent valve, and it's supposed to be routed the way you described, into the trunk body.
      Vent solenoid ?....Hmmm not aware of it. Where is this located ? In the spare tire well ? Thanks for your feedback

    5. #4
      Almost time to do my timing belt
      Join Date
      Aug 2012
      Location
      Northeast
      Posts
      1,409
      Thanks
      3
      Thanked 103 Times in 94 Posts
      Sorry - I didn't read your post carefully enough while trying to multi-task, and didn't notice that you already replaced the part I mentioned above (It's called vent solenoid in some places and purge in others). With both solenoids replaced, seems like you'll need to smoke the system. I do recall someone posting problems with an aftermarket gas cap, but that's probably a long shot.

    6. #5
      Administrator MetroMPG's Avatar
      Join Date
      Jan 2007
      Location
      1000 Islands, Ontario, Canada
      Posts
      4,071
      Thanks
      270
      Thanked 121 Times in 102 Posts
      Gas cap is a cheap part and the easiest to replace. Just sayin'.

    7. #6
      I'll keep it and add a turbo
      Join Date
      Feb 2012
      Location
      Virginia
      Posts
      118
      Thanks
      0
      Thanked 1 Time in 1 Post
      So the hose that comes off the charcoal canister and up into the spare tire well...Is it suppose to connect to something inside ?

    8. #7
      Almost time to do my timing belt
      Join Date
      Aug 2012
      Location
      Northeast
      Posts
      1,409
      Thanks
      3
      Thanked 103 Times in 94 Posts
      Quote Originally Posted by djmarch View Post
      So the hose that comes off the charcoal canister and up into the spare tire well...Is it suppose to connect to something inside ?
      I believe the hose just goes into an empty cavity in the body, and it's done that way to just send the vapors coming out of the canister into a safe area which is not a part of the inside of the vehicle, and where the end of the hose cannot get plugged up.

    9. #8
      I'll keep it and add a turbo
      Join Date
      Feb 2012
      Location
      Virginia
      Posts
      118
      Thanks
      0
      Thanked 1 Time in 1 Post
      Quote Originally Posted by avguy View Post
      I believe the hose just goes into an empty cavity in the body, and it's done that way to just send the vapors coming out of the canister into a safe area which is not a part of the inside of the vehicle, and where the end of the hose cannot get plugged up.
      Makes sense to me...I'll guess I'll try a new gas cap even though the one I have on there is just a couple of years old.





    Similar Threads

    1. Anybody had a code P0449?
      By davalc89 in forum Troubleshooting and Maintenance
      Replies: 1
      Last Post: 08-04-2015, 02:29 AM
    2. 2006 Aveo goes into limp mode with code P39C0 code thrown
      By ricola in forum Troubleshooting and Maintenance
      Replies: 3
      Last Post: 03-10-2015, 03:03 PM
    3. PO 2096 code
      By folson in forum Troubleshooting and Maintenance
      Replies: 6
      Last Post: 07-21-2014, 09:54 PM
    4. Code P0118
      By boyan1st in forum Troubleshooting and Maintenance
      Replies: 3
      Last Post: 01-27-2013, 09:56 AM
    5. Check Engine light P0441
      By kevin4144 in forum Troubleshooting and Maintenance
      Replies: 6
      Last Post: 06-17-2010, 08:16 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •