2009 Aveo Wind Noise - how to fix

[Pontiac1976]

The outside dia of the tubing is 3/8" and I ran 4' of it. You can see in the pic I posted earlier where I ended at the top rear of the door and that ran down to the front of the door where the seal then curves down.

Question: Did does it just pop right in the channel & stay there or did you have to glue it. What type of tubing is it rubber/Plastic. I have to check to see if the 04-08 old style is the same as the 06-10 new style. Door upper seals, but after putting that in does the door close god still. How it in the rain, does it work well in winter? After the car warms up - temps then sits all night in the cold? DO you have any info on that yet?

[brewster]

Question: Did does it just pop right in the channel & stay there or did you have to glue it. What type of tubing is it rubber/Plastic. I have to check to see if the 04-08 old style is the same as the 06-10 new style. Door upper seals, but after putting that in does the door close god still. How it in the rain, does it work well in winter? After the car warms up - temps then sits all night in the cold? DO you have any info on that yet?

Don't get me wrong, but that's a lot of questions for a simple piece of tubing that costs $1.69, the answer to your questions is either yes or answered in an earlier post. It works well, go buy a piece and try it for yourself.

I have not glued it down yet because there doesn't seem to be a need to, we'll see as time goes on.

[Pontiac1976]

Thanks so you got this at a local auto store or hard ware store.

[brewster]

Thanks so you got this at a local auto store or hard ware store.

That's correct, 4' of 3/8" vacuum/emmision hose at the auto parts store.