2010 Aveo won't start.. No codes

[EAD15]

Only buy a quality kit, OE GM, Felpro, etc. you only want to do this once, but yes a kit that contains those parts. New head bolts will be needed as they are one time use only. Also a degree wheel is needed to torque the head bolts, and a tool is required to rotate the water pump when tightening the timing belt.
timing belt kit includes water pump, belt, tensioner, pulley, etc. whatever parts are specific to your year car.

Just an FYI, but the water pump is NOT in the timing loop from the 09 model year onward (with the ecotec engine). The "double pulley" on the serpentine belt that connects the power steering pump via an additional belt is the water pump

[Offroadr]

Just an FYI, but the water pump is NOT in the timing loop from the 09 model year onward (with the ecotec engine). The "double pulley" on the serpentine belt that connects the power steering pump via an additional belt is the water pump

Ok so I don't need some funky special tool for this then other than the degree wheel for the head bolts?

[EAD15]

Ok so I don't need some funky special tool for this then other than the degree wheel for the head bolts?

Service manual says you need a special tool for removing the water pump pulleys (EN-49201) but I paid someone to replace my timing belt and water pump for me when mine was due so I don't know how much it's really needed. You can find them relatively cheap on ebay

https://www.ebay.com/p/671383366

Edit: Here's a discussion regarding the water pump+tool on the LXV engines. Also talks about the timing kit they used

https://www.aveoforum.com/forum/f76/...t-brand-23419/