Printable View
Hello everyone. I have a 2009 Aveo, I recently got this car from a family member and the clock, audio and presets are staying. I tested the fuses for the audio clock and aux port and they were fine but I changed them anyway. The presets work now but the clock and the aux port don't. What can be done to fix this?
Sounds to me like you have 2 seperate issues. The first, the clock, is super common and not that difficult of a fix if you're handy. Credit to ChevyCC.
https://onedrive.live.com/view.aspx?...CPCFAhv4jP8gZ4
As for the aux port, that sounds like it's just an internal malfunction in your radio. Maybe someone else has a suggestion, but I'd guess you'll need to change it out to either a used stock radio, or a new aftermarket if you want to be able to plug in a phone or mp3 player. For the record my 2010's radio only lasted about 3 1/2 years before it started acting up. I recommend an aftermarket if you can afford it.
Quote:
Originally Posted by PoisonIvy
Thank you PoisonIvy. What does after market mean?
What I mean is order yourself up something like below: (non GM brand - Pioneer, Alpine, Kenwood, JVC, etc)
Pioneer FH-X720BT (fhx720bt) Double-DIN Bluetooth Car Stereo w/
$119.99, comes with Bluetooth, a USB input to control and charge an Ipod/Iphone/Android, comes with all the accessories including the mounting bracket, wiring harness and antannae adapter specific to your 2009 Aveo.
Here's a good read on removing the factory stereo. The rest is pretty simple. There's plenty of info on Aveoforum with a quick search.
http://www.aveoforum.com/forum/f84/h...tml#post153945
Quote:
Originally Posted by PoisonIvy
Thank you very much. :D
I'm trying to connect the radio I bought to the aveo after I took out ther stereo (thanks again for the information on how to remove it). I want to crimp rather then solder, are there any how to guides or video showing how to connect the new stereo for the 2009 aveo?
Here is a link to crutchfield with a video
Video: Installing an adapter for your steering wheel audio controls
Here is an other video that is more of what you want:
https://www.youtube.com/watch?v=phDOczKrFgk
I don't have steering wheel audio controls. But thank you. :)
Thank you for this, this helped a lot. I was able to instal my stereo into my car. However, the Scosche in-dash installation kit was too small for the radio. This is how it looks for the time being. lol My boyfriend works at a wood shop so I'll have him cut me a piece of wood to fit. :) Attachment 9628Attachment 9629
Nice work Tabitha! You must have the wrong Scosche kit though. That may be for the 2004 to 2008s. It should fill the entire opening.
Yeah, there should have been a bezel to cover that opening. I nice wood would look good. Maybe some carbon fiber wrap as a possibility too.
The kit I bought said it would work with a 2009 aveo. The problem is the the radio is too wide so I need to find a wider kit. Right now I'm only using the "cubby" to prop the radio up and I also used the foam that encased the radio for support. Haha. Any ideas on what kit would be a good fit? :)
This is mine below. We have the same style interior.
Attachment 9630
You should have a similar bezel immediately around the radio. Of course mine is double DIN, and yours is single DIN, but it should be the same, just the 'pocket' with a radio that's half the size of mine. You must be either missing that trim, or you've got something wrong there.
You should have the Scosche GM2500B kit from the looks of it.
Scosche GM2500B Select GM Single/Double DIN Installation Dash Kit
And by 'prop up', do you mean that it's sitting loose in there? The kit should actually screw back in with the same 4 screws that held the factory radio in there. Maybe there's still parts in your bag that you still need to use? Take a look at the walmart picture of the same GM2500B kit you should be using. Notice the brackets on the sides, they have the same shape as your factory radio, so it should sit nice and in the middle of the opening, and then you have the additional trim/bezel that would go around the radio to fill in the rest of the opening.
http://www.walmart.com/ip/Scosche-GM...OCKET/23841976
EDIT - Here's an awesome write up. I knew this existed, but I couldn't find it, until I was trying to figure out how I'd run my wiring for the satellite radio unit I just ordered.
http://www.aveoforum.com/forum/f94/s...l-guide-13358/
The Scosche kit I have is a GM2600 in-dash installation kit for 2004-13 gm vehicles. The radio is too big for it. It fit's fine in the car, but the radio won't fit into it. Thank you for the links. http://www.aveoforum.com/forum/image...icon_smile.gif It's a little loose, but I finagled it in such a way that it doesn't knock around. I'll post pictures of the kit, and I'll take a look around Walmart for a double din.
You shouldn't have to buy a new radio. And the GM2600 SHOULD work as well. Single DIN plus the little pocket = the same size as a double DIN. They're all standard sizes, so you haven't done anything wrong by buying that radio. Any single DIN is designed to fit in these kits, so you've missed a step somewhere.
Now what I'm thinking is, maaaybe you still have what's called a 'sleeve' that goes around the radio. Google "radio sleeve" so you have a picture of what I mean. There should be a little tab on each slide of the radio that you'll need to flip up so you can slide it off the radio. You don't need this sleeve.
Actually, here's a pretty good video... Not your exact kit, but it should be a similar setup.
https://www.youtube.com/watch?v=bHaqTJJH2PA
Edit - also watch where he pops off that little trim piece from around his radio. That could also be what's making your radio "too wide". Trust me, your radio will fit.
Yup, I took the sleeve off. The black piece in the front of the radio doesn't come off like some do, and the rest of the metal part of the radio is too big as well. This is the radio I bought. I typed in the make and model of my car. I'll try again to fit it in, but I need a bigger kit. I may need to get another radio
http://www.amazon.com/gp/product/B00...ilpage_o01_s00
It's probably the black trim piece in front of the stereo that's going to hold you back. There won't be any bigger kits. The manufacturers make these radios standard sizes. Because the radio is supposed to slide in from the back, you need a radio where you can take that trim piece off it looks like. And for this application you wouldn't use the trim piece. The kit would then hide the exposed metal around the radio.
So it looks like a different radio would be needed. Of course that means more money (hopefully Amazon takes your original back), but I'd really recommend going with at least a name brand like Pioneer, JVC, Kenwood, Alpine, Sony, etc. They're more money then your original, but will probably last longer and you'll get more enjoyment out of them.
Yup, I took the radio back, got another one and it fits really well. The only problem is is that the part of the dash that snaps back on after all this is installed is not snapping back on at the top. Can you see it in the picture? It snapped in fine on the bottom but the top won't snap in. Thank you for you help! :) I appreciate it.
Attachment 9631
That's great! Is it fitting in the slot where it should clip, but it won't stay plugged in (and just pops out)? Like it's just loose, and won't stay in?
This is the new car stereo that I put in is better then the other one I bought. It fits into the installation kit perfect and can withstand my turns. lol The other one was loose. Here's what it looks all lit up. sorry it's blurry. :) Do you see where it won't clip in though? Everything else is find except the aveo radio base around the stereo.
Attachment 9634
Is there a 'hole' for it to actually clip into though. Because you see on the original radio the hole was built in to it, and the mounting kit should have the hole as a part where it bolts into the dash. I think your Scosche kit comes with a couple different mounting brackets, depending on which GM vehicle it was supposed to be used on. So make sure you have the right one. The shape of it should look alot like the mounting points on your original. If it's just misaligned a little, you may just have to see how far it's out, and put a little pressure up or down, depending on how the clips need to line up with the holes.
Now if you mean it's just loose, and the clips pop out, I'd recommend a little painters or masking tape around the clip. Just put a little around at a time, and then it should give it enough resistance to stay in there.
I have the bigger ones on, I'll try the smaller brackets when I get the chance. I have some electrical tape I can use. Thank you :)