Oil leak

[barrel_of_fun]

Hey yall, I recently noticed an oil leak while bleeding my brakes and I'm pretty sure it's from the oil pan gasket.

I was wondering if 1. I have to replace it or can I use something else to seal it and 2. If I do have to replace it how hard would it be to replace

[sjcleckley1]

looks like coolant just looks a little green in the pic and could be the water pump or the gasket behind the water pump housing/oil pump or could be from the oil cooler lines that go into it and block if it oil could be the gasket oil pan just the oil pans not to bad exhaust manifold bottom motor mount and a bracket its a little hard as the axil in the way and a few bolts from trans that thread into the oil pan

if it's the oil pump water pump gasket that's a bigger job alternator, water pump, crank pulley, motor mount top left, air box and timing belt, pulleys, tensioner and covers and everything else for the oil pan job but first see what is actually is first here a pic of the gasket there is a gasket kit called conversion/lower gasket kit has O rings for the oil cooler and crankshaft seal and rear main seal