•  
    Results 1 to 5 of 5

    Thread: Slipped timing belt. Bent valves

    1. #1
      What's wrong with my car?
      Join Date
      Apr 2022
      Location
      indiana
      Posts
      3
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Slipped timing belt. Bent valves

      Hello all, I have a 2006 Aveo and the timing belt has slipped and it has bent all the valves and slightly damaging the pistons. More so on the exhaust side. I'm curious to know have any of you had any good luck replacing the head and timing belt kit? It's been a great little car and has new tires, Battery, alternator and wiper motor. It's in pretty good shape with a few minor battle scars, the interior is very good and everything works as it should. Thanks in advance for your input!!



    2. #2
      2004 1.6 Auto Rust Free
      Join Date
      Jun 2019
      Location
      NC
      Posts
      567
      Thanks
      1
      Thanked 59 Times in 55 Posts
      I’ve rarely seen damage to the pistons. The pistons from the factory have valve reliefs cut into them. So I’m probably wouldn’t worry about that.
      I had to replace the head on mine and used a remanufactured head from eBay. Make sure you get the same year head for your car. Also make sure to transfer the oil galley plugs that go behind the cam sprockets. Also make sure to get a new water pump when you replace the timing kit (tensioner, idler, belt).
      you will also need new head bolts as they are not reusable. Buy a GOOD name brand head gasket (GM or felpro). Special tools needed are a degree tool for the head bolts and a water pump wrench. I used vice grips to (lightly) hold the belt when installing.

    3. #3
      What's wrong with my car?
      Join Date
      Apr 2022
      Location
      indiana
      Posts
      3
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Ok thanks. but what I'm seeing on the pistons aren't reliefs.

    4. #4
      2004 1.6 Auto Rust Free
      Join Date
      Jun 2019
      Location
      NC
      Posts
      567
      Thanks
      1
      Thanked 59 Times in 55 Posts
      A picture is worth 1000 words.

    5. #5
      What's wrong with my car?
      Join Date
      Apr 2022
      Location
      indiana
      Posts
      3
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Quote Originally Posted by Eg.h2o View Post
      A picture is worth 1000 words.
      As soon as I get a chance I get a picture. Thanks.





    Similar Threads

    1. Driver window slipped forward
      By was1958 in forum General Discussion
      Replies: 3
      Last Post: 03-09-2020, 04:20 AM
    2. Project 'orange roadkill' (bent valves rebuild & more)
      By 06T200 in forum Engine & Drivetrain
      Replies: 64
      Last Post: 10-19-2015, 06:21 PM
    3. Replacing valves and fixing timing belt restore compression?
      By tbarb13 in forum Engine & Drivetrain
      Replies: 15
      Last Post: 08-14-2014, 12:58 AM
    4. Bent Valves, possible cracked Piston heads
      By Everoblivion2005 in forum Engine & Drivetrain
      Replies: 12
      Last Post: 03-21-2014, 06:41 PM
    5. Replies: 5
      Last Post: 03-04-2014, 05:15 AM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •