•  
    Results 1 to 5 of 5

    Thread: 2009 5 LT no AC.

    1. #1
      What's wrong with my car?
      Join Date
      Mar 2013
      Location
      Oregon
      Posts
      16
      Thanks
      0
      Thanked 0 Times in 0 Posts

      2009 5 LT no AC.

      Compressor froze can you run a belt without the ac Compressor?
      Any one have the the length for the 5 rib belt with out the Compressor?
      Will the drive belt tensioner work?

      Thanks JV


      Last edited by JVZL1; 06-28-2024 at 05:37 PM.

    2. #2
      What do you mean there's no turbo?
      Join Date
      Apr 2011
      Location
      California
      Posts
      270
      Thanks
      4
      Thanked 39 Times in 38 Posts
      According to the service manual I have access to, supposedly the OEM part number for the belt (without AC) is 55350419, [with AC is 25185133]. I don't have a way to verify no AC information is accurate, but I hope it might be useful

      Rockauto also lists several as "No AC"
      https://www.rockauto.com/en/catalog/...rive,belt,8900
      Last edited by EAD15; 06-28-2024 at 07:20 PM.

    3. #3
      What's wrong with my car?
      Join Date
      Mar 2013
      Location
      Oregon
      Posts
      16
      Thanks
      0
      Thanked 0 Times in 0 Posts
      EAD15, Thank You.

    4. #4
      What's wrong with my car?
      Join Date
      Mar 2013
      Location
      Oregon
      Posts
      16
      Thanks
      0
      Thanked 0 Times in 0 Posts
      I have the belt on no pulley changes. I'll post the belt # later
      Thanks JV

      W/0 AC ACDelco # 5K570

      NAPA
      Micro - V
      25
      050570
      5PK1453

      21/32" X 57 - 1/2" OC

      17mm x 1462mm OC
      Last edited by JVZL1; 07-03-2024 at 08:41 PM.

    5. #5
      Should I keep it?
      Join Date
      Oct 2022
      Location
      USA
      Posts
      63
      Thanks
      0
      Thanked 9 Times in 9 Posts
      If compressor locks up and you turn off the AC switch and disengaging the clutch as long as the bearing in the pully is good it will be ok to run but if pulley bearing bad then that will need to be fixed





    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •