Compressor froze can you run a belt without the ac Compressor?
Any one have the the length for the 5 rib belt with out the Compressor?
Will the drive belt tensioner work?
Thanks JV
Printable View
Compressor froze can you run a belt without the ac Compressor?
Any one have the the length for the 5 rib belt with out the Compressor?
Will the drive belt tensioner work?
Thanks JV
According to the service manual I have access to, supposedly the OEM part number for the belt (without AC) is 55350419, [with AC is 25185133]. I don't have a way to verify no AC information is accurate, but I hope it might be useful
Rockauto also lists several as "No AC"
https://www.rockauto.com/en/catalog/...rive,belt,8900
EAD15, Thank You.
I have the belt on no pulley changes. I'll post the belt # later
Thanks JV
W/0 AC ACDelco # 5K570
NAPA
Micro - V
25
050570
5PK1453
21/32" X 57 - 1/2" OC
17mm x 1462mm OC
If compressor locks up and you turn off the AC switch and disengaging the clutch as long as the bearing in the pully is good it will be ok to run but if pulley bearing bad then that will need to be fixed