It's been a long road, but im finally getting the car back tomorow morning, the only thing i need to do is find an intake system for it and give it a good spring wash.
Ohh snap some pics too
Stay tuned!
It's been a long road, but im finally getting the car back tomorow morning, the only thing i need to do is find an intake system for it and give it a good spring wash.
Ohh snap some pics too
Stay tuned!
> 2010 Mazdaspeed 3
- Fully built, GT35R, 500+ whp
> 2004 Hatchback 2.0L Turbocharged [RETIRED]
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
Well just took 1st test drive and all i gotta say is... DAAAAAAMN! The difference in power between the 2 engines is crazy, the damn thing starts spinning the tires in 2nd gear when i punch it (ok its raining but still) the 1.6 would have NEVER been able to do that. I can feel 3rd gear push me back in my seat alot more then with the 1.6.
Its hard to tell how much hp is in there now but im pretty sure its between 135 and 140 crank hp. After the finishing touches are done ill have a better estimate.
> 2010 Mazdaspeed 3
- Fully built, GT35R, 500+ whp
> 2004 Hatchback 2.0L Turbocharged [RETIRED]
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
Only Aveo owners can get excited over 140 chp. Wow we suck. I'm glad to hear you got it finished! I pray it stays together. Give us reports. Like at 100km, 500km, 1000km, etcOriginally Posted by Nemasys
PICS PICS PICS PICS
Its more fun to drive a slow car fast, rather than drive a fast car slow!
my vw only had 74 hp stock... ?Originally Posted by y2daniel1981
Good news and bad news
Good news is the job is done the engine is running well, good power and all and PICS!!
Bad news is, i think something went wrong yesterday, something blew and the car started working on 2 or 3 cylinders, so i stopped on the side of the road, everything looked alright, start it up again and it works fine now... hmmmm Now though, theres steam coming out of the little breather filter mixed with oil, and when you open the oil cap after shutting it off, steam comes out, its like coolant is mixing up with oil, its even coming out the dipstick. Car is going back to the shop monday morning, theyre gonna chek the gaskets and compression. Something is wrong with the compression cause it runs and sounds like a subaru. If the engine is bad, its on warranty for 1 year on parts and labour, so they will just swap in a new one at no charge for me. All the work is done now so swapping a new block is a matter of hours.
In the meantime, dig the new rubber!!
> 2010 Mazdaspeed 3
- Fully built, GT35R, 500+ whp
> 2004 Hatchback 2.0L Turbocharged [RETIRED]
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
If you've got coolant in your oil you more than likely blew a head gasket. Question is, did it blow in or out? Are you leaking any of the coolant/oil concoction on the ground under your car or see your manifold steaming when you pop the hood?
Farthest North Aveo: Fairbanks, Alaska
Nothing is leaking outside, the only fuild that's coming out is the steam/oil mix from the breather filter, the car is also not burning any oil or coolant, the exhaust smells normal
> 2010 Mazdaspeed 3
- Fully built, GT35R, 500+ whp
> 2004 Hatchback 2.0L Turbocharged [RETIRED]
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57
Huh, well I'm sure they'll figure it out. Thats what warranties are for right? lol
Farthest North Aveo: Fairbanks, Alaska
Im leaning towards the blown head gasket idea, theres def coolant in the oil i cheked this morning after work, the thing im not too sure about tho is the knocking noise it makes. Can a blown head gasket cause this "knocking" sound as well as making the car loose compression and making it sound like its running on 3 cylinders?
> 2010 Mazdaspeed 3
- Fully built, GT35R, 500+ whp
> 2004 Hatchback 2.0L Turbocharged [RETIRED]
- T3/T4 T04E .60 A/R Compressor
- HKS SSQV, OBX Wastegate
- FMIC with 2.5" piping
- Tuned with Megasquirt II v3.57