e-tec2 cam position sensor bolts

[exodus0784]

The bolts holding on my cam position sensor have vanished. Can someone with the FSM look up the sizes please?

Thanks!

[Daox]

They're most likely a standard course threaded M6 bolt (10mm socket head). The length is fairly easy to determine.

[exodus0784]

I'll give that a shot... My '07 decided to spit up the cam position sensor... Bolts are probably in the lower timing cover... Tried to get at it last night, only to find I didn't have a 1/4" drive 17mm socket for the crank nut... Then got distracted by the swiss cheese intake hose... My hands and back hurt

[2010AveoLT]

I'll give that a shot... My '07 decided to spit up the cam position sensor... Bolts are probably in the lower timing cover... Tried to get at it last night, only to find I didn't have a 1/4" drive 17mm socket for the crank nut... Then got distracted by the swiss cheese intake hose... My hands and back hurt

uh, you're going to need a 1/2" Drive Impact Socket for the Crank Bolt; since its done up to 70 Ft Lbs, and then turned an additional 45 Degrees!

[exodus0784]

That's what I meant