Engine Top End

[xintersecty]

Intake. There is a lot of stuff in the way and this turned out to be a major job. I still did not get it finished as there are four more bolts that I could only access from the back side.

This valve controls the water going into the engine cooling system. Check your hoses


Fuel Rail, just unbolt and remove the wires


Just pull it out and move it aside, no need to remove it.


I don't know what is that. A 5mm Allen Key removed it


Here is the other side of that hose


Pulled off the intake hose. It's broken. Maybe time for a custom cold air intake.